Brackets and mounts
L-brackets, wall mounts, clamps and holders generated from text prompts. Every one shows the prompt that made it and downloads as STEP or STL.
Page 17 of 17
Connector – 4‑Slot Interface
Modify ONLY the interface between the existing divider wall and the existing connector. Do NOT change the overall size or appearance of either part. The goal is to create a preci
Rectangular Enclosure Box with Dividers
Create a rectangular industrial electronics enclosure box measuring 140 mm long, 100 mm wide, and 60 mm deep with a wall thickness of 3 mm. Add a central interior dividing wall to
Cultivation Chamber Assembly
Create a fully parametric, manufacturing-grade 3D CAD model of an AI-Embedded Smart Controlled Environment Cultivation Chamber based on the attached reference image, maintaining th
Improved Wall-Connector-Screw Assembly
Use the existing CAD model as the base design. DO NOT redesign the product. DO NOT change the overall appearance, dimensions, or assembly. Only improve the engineering and manufac
Ergonomic Clamping Knob
Modify the existing plastic knob. Keep the overall diameter and rounded top. Replace the smooth outside wall with 12 deep vertical finger grooves equally spaced around the circum
Aluminum Block Heat Exchanger
"Create a parametric mechanical aluminum block heat exchanger. Dimensions: 250mm length, 90mm width, 35mm height. Cut a central longitudinal half-cylinder with a 42mm diameter thro
Square Mount Plate with M3 Countersunk Holes
Need a mount 60mm square with 4 countersunk screw holes to fit M3 screws and make it 3.8mm thick
Motorcycle Front Wing Main Wing
I need to design a motorcycle front aerodynamic wing for QJMOTOR SRK921. Please generate an editable CAD model (STEP format preferred) for 3D printing prototyping. Design target:
Open-Top Drive Tray with Fan Mount and Ventilation
Create a 3D open-top drive tray measuring 193mm width, 193mm length, and 65mm height with 3.5mm outer walls and a solid 3.0mm floor. Top face is completely open. The floor includes
Modular Holographic Assistant Enclosure
Design a modular 3D-printable prototype enclosure for a desktop holographic assistant. Create a rectangular hollow base enclosure measuring 220 mm wide, 180 mm deep, and 45 mm hig
Flipper-Gehäuse: Unterteil + Deckel (exploded)
# TextoCAD Prompt — Flipper-Gehäuse ## HINWEIS TextoCAD arbeitet auf Englisch am zuverlässigsten. Prompt unten reinkopieren. Danach mit den Slidern die [PRÜFEN]-Maße korrigieren,
Describe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.