Brackets and mounts
KINE TRONE Electric Off-Road Mini Buggy (Exploded Multi-Part)
- Bounding box
- 27350.0 × 1120.0 × 1100.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Design a compact, low-cost, single-seat electric off-road mini buggy named "KINE TRONE". The goal is to minimize manufacturing cost, material consumption and overall dimensions while maintaining a practical and mechanically feasible design for one driver weighing 100 kg. OVERALL DIMENSIONS: - Total length: 1600 mm. - Total width: 1100 mm. - Total height: 1250 mm. - Wheelbase: 1050 mm. - Ground clearance: 150 mm. - Wheel diameter: 400 mm. - One central driver seat only. CHASSIS: - Simple welded structural steel tubular chassis. - Use standard square steel tubing to reduce manufacturing costs. - Aluminum exterior body panels. - Minimal number of custom-made components. - Reinforced structural mounting points. - Protective roll cage around the driver. ELECTRIC SYSTEM: - Fully electric vehicle. - Rear-wheel drive. - Rear-mounted electric motor. - Battery capacity: 700 Wh (0.7 kWh). - Battery positioned low in the chassis. - Compact motor controller and protected battery enclosure. WHEELS AND SUSPENSION: - Four compact off-road wheels. - Simple and economical suspension system. - Front steering system. - Rear drive axle. - Appropriate shock absorbers and brakes. DRIVER AREA: - Exactly one ergonomic seat. - One steering wheel. - Accelerator and brake pedals. - One side door only. - Seat belt. - Compact dashboard. EXTERIOR: - Modern mini off-road buggy styling. - Matte black steel frame. - Silver aluminum body panels. - Small LED headlights. - Protective front and rear bumpers. - Wide wheel arches. - Sporty appearance. - Write "KINE TRONE" clearly on the single side door. COST OPTIMIZATION: - Minimize the number of different parts. - Prefer standard commercially available components. - Avoid complex body curves and expensive machining. - Use simple welded structures. - Design components for easy assembly and maintenance. CAD OUTPUT: - Complete 3D assembly. - Separate editable components. - Front, rear, side and top views. - Exploded assembly. - Dimensioned technical drawings. - STEP and STL export if supported. IMPORTANT: Check the available space for a 100 kg driver, steering movement, legroom, battery, motor and suspension. Do not sacrifice driver protection, braking or structural strength to reduce cost. Identify all dimensions requiring engineering validation before manufacturing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 1600 mm | 800 – 3000 |
| Overall Width | 1100 mm | 600 – 2000 |
| Overall Height | 1250 mm | 600 – 2000 |
| Wheelbase | 1050 mm | 500 – 2000 |
| Ground Clearance | 150 mm | 50 – 500 |
| Wheel Diameter | 400 mm | 200 – 800 |
| Wheel Width | 150 mm | 50 – 400 |
| Square Tube Size | 40 mm | 15 – 80 |
| Battery Length | 450 mm | 200 – 800 |
| Battery Width | 350 mm | 200 – 600 |
| Battery Height | 180 mm | 80 – 400 |
| Motor Length | 350 mm | 150 – 600 |
| Motor Width | 300 mm | 150 – 500 |
| Motor Height | 250 mm | 100 – 500 |
| Controller Length | 180 mm | 50 – 400 |
| Controller Width | 120 mm | 50 – 300 |
| Controller Height | 80 mm | 30 – 200 |
| Seat Width | 450 mm | 300 – 600 |
| Seat Depth | 450 mm | 300 – 600 |
| Seat Height | 600 mm | 300 – 1000 |
| Steering Wheel Diameter | 350 mm | 200 – 600 |
| Steering Column Length | 500 mm | 200 – 1000 |
| Pedal Box Length | 250 mm | 100 – 500 |
| Pedal Box Width | 150 mm | 80 – 300 |
| Pedal Box Height | 120 mm | 50 – 300 |
| Door Width | 700 mm | 300 – 1200 |
| Door Height | 600 mm | 300 – 1200 |
| Door Thickness | 40 mm | 10 – 100 |
| Body Panel Thickness | 2 mm | 1 – 10 |
| Bumper Length | 1000 mm | 500 – 2000 |
| Bumper Height | 200 mm | 100 – 500 |
| Bumper Depth | 100 mm | 50 – 300 |
| Exploded Layout Gap | 1800 mm | 100 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu