Brackets and mounts
Under-Desk Dual-Bar PC Mount
- Bounding box
- 380 × 420 × 230 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Industrial dual-bar under-desk PC mount, twin-pillar gantry design made of 3mm matte black powder-coated steel. Features two parallel vertical square-tubing bars (30x30mm cross-section, 220mm drop height) connected to heavy-duty flat top-mounting flanges with slotted bolt holes. The bottom features a cradle tray measuring 310mm width by 420mm depth with 40mm upward retention lips on the front and back edges. Designed to provide a wide open gap between the vertical bars for mechanical clearance, supporting a heavy dual-chamber computer tower securely beneath a steel-framed standing desk.
Parameters
| Name | Value | Range |
|---|---|---|
| Tray width | 310 mm | 200 – 500 |
| Tray depth | 420 mm | 250 – 600 |
| Tray plate thickness | 6 mm | 3 – 12 |
| Retention lip height above tray | 40 mm | 10 – 80 |
| Retention lip thickness | 5 mm | 2 – 10 |
| Square bar size | 30 mm | 20 – 50 |
| Vertical bar drop height | 220 mm | 120 – 400 |
| Bar outer-face inset from tray side | 0 mm | 0 – 20 |
| Flange width | 100 mm | 60 – 160 |
| Flange depth | 120 mm | 60 – 180 |
| Flange plate thickness | 6 mm | 3 – 12 |
| Slotted hole overall length | 30 mm | 10 – 60 |
| Slotted hole width | 6.6 mm | 3 – 12 |
| Slot centre spacing | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl