Brackets and mounts
Compression Testing Tower
- Bounding box
- 126 × 175 × 600 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans between the guide shaft and the lead screw. The block moves vertically along the guide shaft and is driven by the lead screw. A rectangular bar-type load cell is mounted horizontally on the sliding block. The compression loading head is attached to the opposite end of the rectangular load cell, ensuring that the applied force passes through the load cell during the bending test.
Parameters
| Name | Value | Range |
|---|---|---|
| Tower outer width | 120 mm | 80 – 200 |
| Tower height | 600 mm | 400 – 1000 |
| Corner post size | 12 mm | 6 – 30 |
| Ring/beam thickness | 12 mm | 6 – 30 |
| Separation between lead screw and guide shaft | 50 mm | 30 – 80 |
| Lead screw diameter | 16 mm | 8 – 30 |
| Lead screw length | 450 mm | 200 – 600 |
| Lead screw pitch | 4 mm | 2 – 10 |
| Guide shaft diameter | 16 mm | 8 – 30 |
| Guide shaft length | 450 mm | 200 – 600 |
| Bearing support width | 100 mm | 60 – 150 |
| Bearing support depth | 40 mm | 20 – 80 |
| Bearing support height | 30 mm | 15 – 60 |
| Lower bearing support bottom Z | 30 mm | 10 – 200 |
| Upper bearing support bottom Z | 480 mm | 300 – 800 |
| Sliding block width | 80 mm | 50 – 120 |
| Sliding block depth | 40 mm | 20 – 80 |
| Sliding block height | 30 mm | 15 – 60 |
| Sliding block bottom Z | 285 mm | 100 – 500 |
| Load cell length | 80 mm | 40 – 150 |
| Load cell width | 20 mm | 10 – 40 |
| Load cell height | 10 mm | 5 – 20 |
| Load cell center Y | -59 mm | -100 – -20 |
| Loading head diameter | 20 mm | 10 – 40 |
| Loading head length | 30 mm | 10 – 60 |
| Loading head bottom Z | 266 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu