Brackets and mounts
Mecha Project Box 160 x 57 x 57
- Bounding box
- 160 × 71.5 × 57.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
i need box from photo to 3d print on bambu lab p2s lenght:160mm height:57mm width:57mm and mounting brackets on lid must be concave on down convexly lenght 115mm height 1mm width 4,42mm The corners should be rounded to 90 degrees
Parameters
| Name | Value | Range |
|---|---|---|
| Outside length | 160 mm | 60 – 220 |
| Outside width | 57 mm | 30 – 150 |
| Outside height, lid adds 3 | 54 mm | 20 – 120 |
| Side wall thickness | 2 mm | 1.2 – 6 |
| Floor thickness | 2 mm | 1.2 – 6 |
| Rounded outer corner radius | 6 mm | 2 – 20 |
| Lid plate thickness | 3 mm | 1.5 – 6 |
| Lip depth inside the box | 1.5 mm | 0.5 – 6 |
| Lip wall thickness | 1.6 mm | 1.2 – 4 |
| Clearance per side | 0.25 mm | 0.1 – 0.6 |
| Underside mounting rib length | 115 mm | 20 – 200 |
| Underside mounting rib width | 4.42 mm | 2 – 20 |
| Underside mounting rib height | 1 mm | 0.6 – 5 |
| Number of top ribs | 7 mm | 1 – 14 |
| Top rib width | 6 mm | 2 – 14 |
| Top rib height | 0.8 mm | 0.6 – 3 |
| Margin from lid ends | 20 mm | 4 – 40 |
| Power button recess diameter | 12 mm | 6 – 25 |
| Power button recess depth | 0.8 mm | 0.6 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
