Brackets and mounts
Spindle with Servo Linear-Actuator Pen Tool Changer
- Bounding box
- 160 × 90 × 115 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
build a 3d model of spindle that have automatic tool changer to pen using servo motor linear actuator
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate width | 160 mm | 100 – 260 |
| Base plate depth | 90 mm | 60 – 180 |
| Base plate thickness | 8 mm | 4 – 20 |
| Column width | 26 mm | 15 – 60 |
| Column depth | 20 mm | 12 – 60 |
| Column height above plate | 92 mm | 40 – 200 |
| Column centre offset from spindle axis | -30 mm | -60 – -10 |
| Bracket width | 46 mm | 30 – 90 |
| Bracket depth | 56 mm | 30 – 110 |
| Bracket thickness | 14 mm | 8 – 30 |
| Bracket bottom height | 74 mm | 30 – 150 |
| Spindle housing diameter | 34 mm | 20 – 70 |
| Spindle housing length | 55 mm | 30 – 120 |
| Spindle housing bottom height | 60 mm | 30 – 150 |
| Spindle shaft diameter | 14 mm | 8 – 30 |
| Chuck diameter | 22 mm | 14 – 40 |
| Chuck height | 14 mm | 8 – 30 |
| Linear rail length | 100 mm | 60 – 180 |
| Linear rail width | 26 mm | 14 – 50 |
| Linear rail height | 15 mm | 8 – 35 |
| Rail centre offset from spindle axis | 30 mm | 15 – 60 |
| Servo body length | 28 mm | 16 – 50 |
| Servo body width | 20 mm | 12 – 40 |
| Servo body height | 30 mm | 16 – 60 |
| Carriage width | 30 mm | 16 – 60 |
| Carriage depth | 24 mm | 16 – 50 |
| Carriage height | 10 mm | 6 – 24 |
| Tool arm width | 16 mm | 8 – 34 |
| Pen body diameter | 7.6 mm | 4 – 12 |
| Pen length | 38 mm | 20 – 38 |
| Tool clamp outer diameter | 16 mm | 10 – 30 |
| Tool clamp bore diameter | 7.4 mm | 4 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
