Brackets and mounts
1U Rack-Mount Appliance with Raspberry Pi, KVM, and UPS
- Bounding box
- 482.6 × 283.0 × 66.7 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- October 4, 2026
Download
Free to download and use. See the terms.
The prompt
I need a 1U rack-mount appliance box that will have a raspberry pi in it, a kvm chip, and a small ups/battery backup.
Parameters
| Name | Value | Range |
|---|---|---|
| Rack Width | 482.6 mm | 400 – 600 |
| Rack Depth | 280 mm | 200 – 500 |
| Rack Height (1U) | 44.45 mm | 20 – 80 |
| Bottom Thickness | 1.5 mm | 0.5 – 5 |
| Side Wall Thickness | 1.5 mm | 0.5 – 5 |
| Mounting Boss Diameter | 4 mm | 2 – 10 |
| Mounting Boss Height | 5 mm | 2 – 20 |
| Top Cover Thickness | 1.5 mm | 0.5 – 5 |
| Top Mounting Hole Diameter | 3.2 mm | 1 – 8 |
| Vent Slot Length | 80 mm | 10 – 200 |
| Vent Slot Width | 4 mm | 1 – 10 |
| Vent Slot Count | 5 mm | 1 – 20 |
| Front Panel Thickness | 3 mm | 1 – 6 |
| Front I/O Cutout Width | 30 mm | 5 – 60 |
| Front I/O Cutout Height | 15 mm | 5 – 30 |
| Front LED Hole Diameter | 3 mm | 1 – 8 |
| Front Power Button Hole Diameter | 8 mm | 2 – 15 |
| Rear I/O Panel Thickness | 2 mm | 0.5 – 5 |
| Rear Power Cutout Width | 20 mm | 5 – 60 |
| Rear Power Cutout Height | 10 mm | 5 – 30 |
| Rear Ethernet Cutout Width | 16 mm | 5 – 40 |
| Rear Ethernet Cutout Height | 12 mm | 5 – 30 |
| Rear USB Cutout Width | 12 mm | 5 – 30 |
| Rear USB Cutout Height | 10 mm | 5 – 30 |
| Rear HDMI Cutout Width | 16 mm | 5 – 40 |
| Rear HDMI Cutout Height | 8 mm | 3 – 30 |
| Rear KVM Cutout Width | 20 mm | 5 – 50 |
| Rear KVM Cutout Height | 10 mm | 5 – 30 |
| Raspberry Pi Length | 85 mm | 50 – 150 |
| Raspberry Pi Width | 56 mm | 30 – 100 |
| Raspberry Pi Height | 17 mm | 5 – 40 |
| Raspberry Pi X Position | -120 mm | -200 – 0 |
| Raspberry Pi Y Position | 105 mm | 0 – 140 |
| Raspberry Pi Mount Inset X | 3 mm | 0 – 10 |
| Raspberry Pi Mount Inset Y | 3 mm | 0 – 10 |
| KVM Module Length | 50 mm | 20 – 100 |
| KVM Module Width | 30 mm | 10 – 80 |
| KVM Module Height | 10 mm | 3 – 30 |
| KVM Module X Position | 0 mm | -100 – 100 |
| KVM Module Y Position | 110 mm | 0 – 140 |
| KVM Mount Inset | 2 mm | 0 – 10 |
| UPS Module Length | 100 mm | 50 – 200 |
| UPS Module Width | 60 mm | 20 – 120 |
| UPS Module Height | 25 mm | 10 – 60 |
| UPS Module X Position | 150 mm | 80 – 220 |
| UPS Module Y Position | 0 mm | -100 – 100 |
| UPS Mount Inset | 5 mm | 0 – 15 |
| UPS Status LED Diameter | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu