Brackets and mounts
Mounting Plate with Component Enclosures
- Bounding box
- 180.0 × 160.0 × 19.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat rectangular mounting plate that is 180mm long, 160mm wide, and 3mm thick. On the top face of the plate, extrude three separate rectangular enclosures with 2mm thick walls to hold components. The first enclosure is for a full-sized breadboard: make the inner dimensions 166mm long and 56mm wide, with a wall height of 8mm. Add a 1mm inward-facing lip along the top inside edge of these walls to create a snap-fit mechanism. The second enclosure is for a 6-AA battery pack: make the inner dimensions 90mm long and 60mm wide, with a wall height of 15mm. Add 1mm inward-facing snap-fit lips at the top inside edge of the walls. The third enclosure is for a USB power bank: make the inner dimensions 100mm long and 65mm wide, with a wall height of 15mm. Add 1mm inward-facing snap-fit lips at the top inside edge of the walls. Through the main 3mm base plate, cut out four 3.2mm diameter circular holes, placing one hole 5mm inward from each of the four outer corners. These are the only screw holes. Finally, cut two 20mm by 10mm rectangular slots straight through the main base plate near the center to act as cable management routing holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 180 mm | 100 – 300 |
| Plate Width | 160 mm | 100 – 300 |
| Plate Thickness | 3 mm | 1 – 10 |
| Wall Thickness | 2 mm | 1 – 5 |
| Lip Depth | 1 mm | 0.5 – 3 |
| Breadboard Inner Length | 166 mm | 50 – 300 |
| Breadboard Inner Width | 56 mm | 30 – 200 |
| Breadboard Wall Height | 8 mm | 5 – 30 |
| Battery Inner Length | 90 mm | 50 – 200 |
| Battery Inner Width | 60 mm | 30 – 200 |
| Battery Wall Height | 15 mm | 5 – 40 |
| Power Bank Inner Length | 100 mm | 50 – 200 |
| Power Bank Inner Width | 65 mm | 30 – 200 |
| Power Bank Wall Height | 15 mm | 5 – 40 |
| Screw Hole Diameter | 3.2 mm | 2 – 10 |
| Corner Offset | 5 mm | 2 – 20 |
| Slot Length | 20 mm | 5 – 50 |
| Slot Width | 10 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent