Fittings and adapters
Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.
Page 9 of 13
Lip-Held Whistle Body
// ======================================================== // COMPACT LIP-HELD WHISTLE CANDY — max whistle strength // Not tuned to a specific frequency — optimized for a // loud
Combination Lock Housing
Create a circular base, outer diameter 80 mm, height 40 mm, wall thickness 2.2 mm. Inside, place two stacked circular spools on a central axle. Each spool has a 65 mm flange diamet
Blink Doorbell Gen2 Flush Wall Mount Bracket
Erstelle eine zweistufige, bündig abschließende Montagehalterung für eine Blink Video Doorbell Gen 2, die in eine vorhandene Wandöffnung eingepasst wird. 1. Wandadapter-Körper: Ers
Spherical Mould Set
Create a parametric STL model of a two-piece spherical mould for clay. Requirements: ▪ The mould should consist of two identical halves that, when assembled, form a perfect sphere.
Thread Adapter 9x0.75 to 1/2-28
9mm-0.75 to 1/2"-28 thread adapter
Low Loss Header Assembly
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter
Stepped Hose Adapter
Create a stepped cylindrical hose adapter with a central stop flange and a continuous through-hole. - Total length: 3.25 inches. - Side A (larger end): Outer diameter 1.875 inches
Low Loss Header Assembly
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter
Cable Gland Adapter PG13.5 Male to PG9 Female
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Metering Line Assembly with Headers and Instruments
Design a metering line assembly for an oil quantity and quality measurement system. The assembly must consist of an inlet header, an outlet header, and two metering lines. Both hea
Pipe Flange
Generate a pipe flange
Rocket Fin Sets - Attached
now make it so that the fins are attatched to the adapters.
Rev G Display Mount
Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • H
Rifled Cylinder with Tangential Adapter
Cylinder with an adapter that is a tangential coupling at 45degree with the cylinder that has 30degree degree rifling internally that is 5mm deep and 10mm across throughout the int
Flanged Bushing (法蘭軸套)
參數名稱,說明,預設值 (mm) inner_dia,軸套內徑(軸心配合孔),20 body_outer_dia,主體圓柱外徑,35 body_height,主體總高度,40 flange_dia,底座法蘭外徑,60 flange_thick,法蘭盤厚度,8 hole_dia,固定螺絲孔直徑,5.5 hole_pcd,固定孔分度圓直徑 (PCD),46 ho
PG9 female to PG13.5 male cable gland adapter
Adapter for connecting a PG9 cable on one side and PG13.5 on the other: PG13.5 male thread, PG9 female thread.
Chassis Rail Beam
"Take the generated model and hollow out the main long longitudinal beam to make it a hollow rectangular tube with an open-ended central channel and a 3mm wall thickness. Keep the
Mainbody — editable CAD rebuild
True analytic CAD reconstruction from measured STL features. Smooth top bore replaces threads. Independent diameter, pocket, flange, channel and body parameters. Approximate revers
Cylinder Adapter 36-42mm
Cylinder adapter, converting 36mm inner diameter to 42mm inner diameter with 1/4 inch thickness, 3 inches in length
1/2-28 to M14 thread adapter
thread adapter from 1/2"-28 x M14
10 kL hot water storage tank - opposite DN50 inlets and bottom DN80 outlet
Create precise parametric vertical 10,000 litre atmospheric hot-water tank, with 2 DN50 horizontal flanged upper sidewall inlets at identical height exactly 180 degrees apart: heat
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole
5-Piece Planter Set: Inner Pot + 4 Decorative Outer Pots
Create ONE STL file containing exactly 5 separate objects arranged side by side: 1 inner pot and 4 decorative outer pots. Inner pot: 70 mm high, 88 mm upper outer diameter, 3 mm w
Oldham-type coupling v2 (insert with Ø36 recess)
Oldham-type coupling from AGH drawings 00.04.01 / 00.04.02 / 00.04.03, insert now with the central Ø36 recess
Showing 24 of 292 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
