Fittings and adapters
PG9 female to PG13.5 male cable gland adapter
- Bounding box
- 27.7 × 24 × 22 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Adapter for connecting a PG9 cable on one side and PG13.5 on the other: PG13.5 male thread, PG9 female thread.
Parameters
| Name | Value | Range |
|---|---|---|
| PG13.5 male outer diameter | 20.4 mm | 19 – 22 |
| PG13.5 male root diameter | 19 mm | 17 – 20.4 |
| PG13.5 male thread length | 10 mm | 5 – 25 |
| PG9 female major diameter | 15.2 mm | 14 – 17 |
| PG9 female minor diameter / cable bore | 13.9 mm | 12 – 15 |
| PG9 female thread depth | 10 mm | 5 – 20 |
| Printing clearance on female thread | 0.2 mm | 0 – 0.6 |
| Hex across flats | 24 mm | 22 – 30 |
| Hex height | 12 mm | 10 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
90 Degree Elbow with Perpendicular Cross Holes
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
D120 Flange
make flange of diameter 120mm with 10mm thickness