Fittings and adapters
Cylindrical D-Shaft Flange
- Bounding box
- 40 × 40 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flange, add 4 through-holes of 3 mm diameter equally spaced on a 25 mm pitch circle diameter.
Parameters
| Name | Value | Range |
|---|---|---|
| Base flange diameter | 40 mm | 20 – 200 |
| Total height | 15 mm | 5 – 100 |
| Bottom flange thickness | 4 mm | 1 – 20 |
| Central D-shaft bore diameter | 8 mm | 4 – 40 |
| Mounting hole diameter | 3 mm | 1 – 10 |
| Mounting hole pitch circle diameter | 25 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di