Fittings and adapters
Radial Lip Seal 75×100
- Bounding box
- 100.0 × 100.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Diameter (shaft) | 75 mm | 20 – 200 |
| Outer Diameter (bore fit) | 100 mm | 30 – 300 |
| Seal Height | 12 mm | 4 – 50 |
| Body Wall Thickness | 3 mm | 1 – 10 |
| Outer Retention Flange Height | 4 mm | 1 – 15 |
| Lip Taper Angle (deg) | 15 deg | 5 – 45 |
| Leading Edge Chamfer | 1.5 mm | 0.5 – 4 |
| Spring Groove Diameter | 2 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end