Fittings and adapters
Shouldered Spacer 20/26 x 15
- Bounding box
- 26 × 26 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness. Add a centered through-hole of 8 mm diameter passing through the entire part. Total height: 15 mm. Use millimeters and show all dimensions clearly.
Parameters
| Name | Value | Range |
|---|---|---|
| Main body outer diameter | 20 mm | 10 – 60 |
| Main body height above flange | 12 mm | 2 – 50 |
| Flange outer diameter | 26 mm | 12 – 80 |
| Flange thickness | 3 mm | 1 – 10 |
| Centered through-hole diameter | 8 mm | 2 – 40 |
| Edge chamfer | 0.8 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole