Fittings and adapters
Micrometer Expansion Tool
- Bounding box
- 25.0 × 25.0 × 170.1 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly │ ▼ Pushes the Nozzle Wall │ ▼ Restores the Circular Shape │ ▼ Remove Tool and Inspect
Parameters
| Name | Value | Range |
|---|---|---|
| Screw Total Length | 120 mm | 80 – 200 |
| Shaft Diameter | 20 mm | 10 – 40 |
| Knob Diameter | 25 mm | 15 – 50 |
| Knob Length | 30 mm | 15 – 60 |
| Thread Pitch | 2.5 mm | 0.5 – 5 |
| Thread Depth | 1.35 mm | 0.2 – 3 |
| Cone Base Diameter | 15 mm | 5 – 30 |
| Cone Length | 40 mm | 10 – 80 |
| Jaw Length | 50 mm | 20 – 80 |
| Jaw Outer Diameter | 25 mm | 15 – 60 |
| Jaw Angular Span | 85 deg | 60 – 90 |
| Jaw Clearance | 0.2 mm | 0 – 1 |
| Cone Insertion Offset | 0 mm | -10 – 20 |
| Knurl Groove Count | 12 | 6 – 36 |
| Knurl Groove Width | 1 mm | 0.5 – 2.5 |
| Knurl Groove Depth | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Bęben (cable drum)
Make the part from drawing 00.02.01 'Bęben': cable drum with Ø400 flanges, Ø239/Ø219 tube, 290 between flange outer faces, 370 overall, Ø105/Ø75 hubs with keyway, 3 ribs and 3 kidn
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part