Fittings and adapters
90 Degree Elbow with Perpendicular Cross Holes
- Bounding box
- 30 × 20 × 40 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical leg length from corner | 30 mm | 10 – 120 |
| Horizontal leg length from corner | 20 mm | 10 – 120 |
| Tube outside diameter / width | 20 mm | 10 – 60 |
| Wall thickness | 2.5 mm | 1.2 – 8 |
| Cross hole diameter | 6 mm | 2 – 16 |
| Cross hole centre from vertical end face | 10 mm | 3 – 60 |
| Cross hole centre from horizontal end face | 8 mm | 3 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part