Fittings and adapters
D120 Flange
- Bounding box
- 120 × 120 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
make flange of diameter 120mm with 10mm thickness
Parameters
| Name | Value | Range |
|---|---|---|
| Outer flange diameter | 120 mm | 40 – 300 |
| Flange plate thickness | 10 mm | 2 – 40 |
| Central bore diameter | 40 mm | 5 – 150 |
| Bolt circle diameter | 90 mm | 10 – 250 |
| Bolt hole diameter | 9 mm | 2 – 20 |
| Number of bolt holes | 6 mm | 3 – 12 |
| Chamfer on outer edges | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
90 Degree Elbow with Perpendicular Cross Holes
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end