122.8135.9128.5
Loading the interactive model…
Interactive 3D model of Mainbody — editable CAD rebuild

Fittings and adapters

Mainbody — editable CAD rebuild

1 views
Bounding box
135.9 × 122.8 × 128.5 mm
Engine
Precision B-rep
Parameters
51
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

True analytic CAD reconstruction from measured STL features. Smooth top bore replaces threads. Independent diameter, pocket, flange, channel and body parameters. Approximate reverse engineering: small blends and detailed lower pocket steps omitted; flange represented by an elliptical boss.

Parameters

NameValueRange
Body height128 mm96 – 160
Base diameter122.34 mm73.404 – 165.159
Top outer diameter74.58 mm44.748 – 100.683
Top bore diameter68.2 mm40.92 – 92.07
Top bore depth20.4 mm15.3 – 25.5
Funnel bottom z94 mm70.5 – 117.5
Funnel bottom diameter20.8 mm12.48 – 28.08
Side bore diameter44.95 mm26.9724 – 60.6879
Side bore height70.85 mm53.1349 – 88.5582
Side bore y-0.21 mm-10.2101 – 9.7899
Side bore end x21.5 mm11.5 – 31.5
Flange face x-40.98 mm-50.981 – -30.981
Flange width107.5 mm80.625 – 134.375
Flange height77 mm57.75 – 96.25
Flange center z71.33 mm61.328 – 81.328
Mount hole diameter4.4 mm2.64 – 5.94
Mount hole depth9 mm6.75 – 11.25
Mount y1-31.58 mm-41.5808 – -21.5808
Mount z145.22 mm35.2203 – 55.2203
Mount y231.29 mm21.294 – 41.294
Mount z296.82 mm86.8223 – 106.8223
Well width38.11 mm28.5795 – 47.6325
Well depth25.05 mm18.7882 – 31.3137
Well center x0.45 mm-9.553 – 10.447
Well center y-0.28 mm-10.2805 – 9.7195
Well bottom z89.46 mm67.095 – 111.825
Well top z102 mm76.5 – 127.5
Base pocket width86 mm64.5 – 107.5
Base pocket depth39.61 mm29.7052 – 49.5087
Base pocket height28.95 mm21.7088 – 36.1812
Base pocket x-0.44 mm-10.442 – 9.558
Base pocket y6.75 mm-3.2535 – 16.7465
Channel width29 mm21.75 – 36.25
Channel end x12 mm2 – 22
Channel center y-38.76 mm-48.76 – -28.76
Channel floor1.5 mm1.125 – 1.875
Channel roof21.5 mm16.125 – 26.875
Ramp width30.5 mm22.875 – 38.125
Ramp center x-3.25 mm-13.25 – 6.75
Ramp start y-53.26 mm-63.26 – -43.26
Ramp end y0 mm-10 – 10
Ramp lower start z10 mm7.5 – 12.5
Ramp lower end z57 mm42.75 – 71.25
Ramp upper start z28.3 mm21.225 – 35.375
Ramp upper end z70.7 mm53.025 – 88.375
Tab center x-58.96 mm-68.96 – -48.96
Tab center y-39.76 mm-49.76 – -29.76
Tab width31 mm23.25 – 38.75
Tab reach x-30 mm-40 – -20
Tab height5 mm3.75 – 6.25
Tab wall2 mm1.5 – 2.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Mainbody — editable CAD rebuild - Free CAD Model (STEP, STL) | TextoCAD