Fittings and adapters
Inline Hose Adapter with Sensor Boss
- Bounding box
- 26 × 20 × 65 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a cylindrical inline hose adapter tube for automotive cooling. Total length is 65mm. The main central body is a cylinder with an outer diameter of 20mm and a length of 25mm. On both ends of the central body, add 20mm long hose barb fittings for a 13mm (1/2 inch) inner diameter hose, featuring two raised conical barbs per side (max outer diameter 14.2mm) for secure hose retention. Drill a concentric through-hole along the entire length of the tube with a 9mm inner diameter. On the side of the central cylinder, create a flat milled boss face (16mm diameter) perpendicular to the main axis. In the center of this flat boss, create a perpendicular blind hole going into the main through-hole, tapped with an M10x1 metric fine internal thread for a temperature sensor. Add 1mm chamfers to all outer edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Total assembled length | 65 mm | 50 – 120 |
| Central body OD | 20 mm | 15 – 40 |
| Central body length | 25 mm | 10 – 60 |
| Hose fitting shaft OD | 13 mm | 10 – 25 |
| Barb max OD | 14.2 mm | 12 – 25 |
| Through-hole ID | 9 mm | 4 – 15 |
| Sensor boss face OD | 16 mm | 10 – 30 |
| Boss protrusion beyond body | 6 mm | 3 – 15 |
| Chamfer | 1 mm | 0.5 – 2 |
| Sensor thread major diameter | 10 mm | 8 – 20 |
| Sensor thread pitch | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
1in Quarter-Turn Bayonet Coupling
Create a one-inch fitting that requires a quarter-turn to lock
Screw-Top Pill Bottle with Nozzle
ok make it seperate cap and bottle with a normal thread no childproofing needed. remove the arrow. give it a 5 mm tall nozzle from the cap with a 3 mm hole
Funny Female Spray Can Nozzle
FUNNY FEMALE SPRAY CAN NOZZLE
US Coin Organizer
make a mathamatically acurate exact fitting us coin organiser please
Nozzle Grommet Donut
i need a small rounded donut shape with internal diameter of 3mm to dit around a nozzle inside an automatic soap dispenser