Fittings and adapters
Nozzle Grommet Donut
- Bounding box
- 7.8 × 7.8 × 2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 3
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
i need a small rounded donut shape with internal diameter of 3mm to dit around a nozzle inside an automatic soap dispenser
Parameters
| Name | Value | Range |
|---|---|---|
| Nozzle bore diameter | 3 mm | 1 – 20 |
| Cross-section (tube) diameter | 2.4 mm | 1.2 – 8 |
| Flat bed-contact face height | 0.4 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
2in to 3.25in Speaker Adapter
need a square adapter for a 2in speaker and the top of the adapter i need it to fit a 3.25in speaker
DN700 PN40 Flanged Pipe Stub (scaled)
Flanged pipeline DN 700 PN 40 width 15 mm
1in Quarter-Turn Bayonet Coupling
Create a one-inch fitting that requires a quarter-turn to lock
Screw-Top Pill Bottle with Nozzle
ok make it seperate cap and bottle with a normal thread no childproofing needed. remove the arrow. give it a 5 mm tall nozzle from the cap with a 3 mm hole
Funny Female Spray Can Nozzle
FUNNY FEMALE SPRAY CAN NOZZLE