Fittings and adapters
Rocket Fin Sets - Attached
- Bounding box
- 653 × 250 × 141 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
now make it so that the fins are attatched to the adapters.
Parameters
| Name | Value | Range |
|---|---|---|
| Slip-on bore, clears 20.5 mm rocket body | 20.6 mm | 10 – 40 |
| Outside diameter | 24 mm | 15 – 50 |
| Height | 20.5 mm | 5 – 60 |
| Fin root gusset width | 3.4 mm | 3 – 8 |
| Fin root gusset height | 12 mm | 3 – 20 |
| Fin plate thickness | 3 mm | 1 – 6 |
| Root chord | 100 mm | 40 – 250 |
| Tip chord | 50 mm | 10 – 200 |
| Span / fin height | 80 mm | 20 – 200 |
| Root chord | 122 mm | 40 – 250 |
| Tip chord | 61 mm | 10 – 200 |
| Span / fin height | 98 mm | 20 – 200 |
| Root chord | 141 mm | 40 – 250 |
| Tip chord | 71 mm | 10 – 200 |
| Span / fin height | 113 mm | 20 – 200 |
| Overlap between fin set tips | 0.5 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Y-Tube Adapter 8mm to 2x3mm
I need a y-adapter for some tubing. i want to go from a wide 8mm tube to two smaller 3mm tubes. the entire part should be easily 3d printable#
Linear Guide Carriage Block
Create a heavy-duty mechanical linear guide carriage block for an inclined spindleless veneer peeling machine. Overall Dimensions: - Length (X-axis): 200 mm - Width (Y-axis): 150
Threaded Step-Shaft Stub/Nipple
Subject: 3D model of a rotation symmetric step-shaft fitting (stub/nipple) with axial bored hole and external/internal threads. Dimensions and Geometry Details: * Total length: 44
Step-Shaft Nipple with Through-Bore
Model_Type: Rotation-symmetric step-shaft fitting (nipple) with a central axial through-hole. Total_Length: 44.0 mm Coordinate_System: X-axis from Left (X=0) to Right (X=44) 1. LE
MAF25C MR-624 Direct Drive Blower + 250x370 to DN500 Flanged Adapter
Upgrade previously shape-corrected Marvel Air Flow MAF25C 30HP direct-drive blower assembly by adding an IN-LINE HOLLOW stainless rectangular-to-round transition to existing left-f