Fittings and adapters
Y-Tube Adapter 8mm to 2x3mm
- Bounding box
- 20.9 × 12.4 × 28.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
I need a y-adapter for some tubing. i want to go from a wide 8mm tube to two smaller 3mm tubes. the entire part should be easily 3d printable#
Parameters
| Name | Value | Range |
|---|---|---|
| Wide tube OD | 8 mm | 4 – 20 |
| Small tube OD | 3 mm | 2 – 12 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Clearance per side | 0.2 mm | 0 – 0.5 |
| Socket depth | 10 mm | 5 – 25 |
| Included outlet angle | 50 deg | 20 – 90 |
| Branch length | 16 mm | 8 – 40 |
| Split point height | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
90 Degree Elbow with Perpendicular Cross Holes
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
D120 Flange
make flange of diameter 120mm with 10mm thickness