Fittings and adapters
Linear Guide Carriage Block
- Bounding box
- 200.0 × 150.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a heavy-duty mechanical linear guide carriage block for an inclined spindleless veneer peeling machine. Overall Dimensions: - Length (X-axis): 200 mm - Width (Y-axis): 150 mm - Thickness (Z-axis): 40 mm Features to add: 1. In the exact geometric center of the 200x150 mm face, add a stepped through-hole for a ball screw interface. 2. The main clearance hole must be 32 mm diameter, cut completely through the 40 mm thickness. 3. On the front face, add a concentric counterbore recess of 50 mm diameter, cut to a depth of 10 mm (to seat the SFU3210 ball nut flange). Ensure all geometry uses flat mechanical faces and precise right angles for CNC machining compatibility.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (X) | 200 mm | 150 – 300 |
| Width (Y) | 150 mm | 100 – 250 |
| Thickness (Z) | 40 mm | 20 – 80 |
| Ball Screw Clearance Hole Dia | 32 mm | 20 – 50 |
| Counterbore Dia | 50 mm | 36 – 80 |
| Counterbore Depth | 10 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Rainwater Fan Spreader Adapter
adapter für Regenwasser mit Rohranschluss 70mm dann 90 grad bogen und fächerauslass mit 200 mm
Y-Tube Adapter 8mm to 2x3mm
I need a y-adapter for some tubing. i want to go from a wide 8mm tube to two smaller 3mm tubes. the entire part should be easily 3d printable#
Weld Neck Flange
Build weld necked flange
10 kL hot-water tank - 90 degree low DN80 side outlet
Corrected 10 kL tank: two DN50 CHP and heat-pump sidewall inlets 180 degrees apart near the top, and one DN80 low-level sidewall outlet at 90 degrees to both, centre 100 mm above i
10 kL hot water storage tank - opposite DN50 inlets and bottom DN80 outlet
Create precise parametric vertical 10,000 litre atmospheric hot-water tank, with 2 DN50 horizontal flanged upper sidewall inlets at identical height exactly 180 degrees apart: heat