Fittings and adapters
Weld Neck Flange
- Bounding box
- 190 × 190 × 74 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Build weld necked flange
Parameters
| Name | Value | Range |
|---|---|---|
| Flange outer diameter | 190 mm | 60 – 400 |
| Flange thickness | 24 mm | 8 – 60 |
| Raised face diameter | 127 mm | 40 – 300 |
| Raised face height | 2 mm | 0.6 – 10 |
| Hub base diameter | 108 mm | 40 – 250 |
| Neck / pipe outer diameter | 89 mm | 20 – 250 |
| Hub + neck length from back face | 48 mm | 10 – 150 |
| Hub taper length | 28 mm | 5 – 120 |
| Through bore diameter | 78 mm | 10 – 250 |
| Bolt circle diameter | 152.4 mm | 30 – 350 |
| Bolt hole diameter | 20 mm | 3 – 40 |
| Number of bolt holes | 4 mm | 2 – 12 |
| Weld bevel depth | 3 mm | 0 – 10 |
| Edge chamfer | 1.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Rocket Fin Sets - Attached
now make it so that the fins are attatched to the adapters.
Threaded Step-Shaft Stub/Nipple
Subject: 3D model of a rotation symmetric step-shaft fitting (stub/nipple) with axial bored hole and external/internal threads. Dimensions and Geometry Details: * Total length: 44
Step-Shaft Nipple with Through-Bore
Model_Type: Rotation-symmetric step-shaft fitting (nipple) with a central axial through-hole. Total_Length: 44.0 mm Coordinate_System: X-axis from Left (X=0) to Right (X=44) 1. LE
Model Rocket Fin Set Assembly
For each fin set, the fins should be connected to the adapter creating an assemble.
PN16 Slip-On Flanges DN80 and DN200
Based on the attached design 2 slip on PN 16 flanges - one for Dn 80 and one for Dn 200
