Fittings and adapters
Rainwater Fan Spreader Adapter
- Bounding box
- 167.8 × 200 × 117.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
adapter für Regenwasser mit Rohranschluss 70mm dann 90 grad bogen und fächerauslass mit 200 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Pipe connection bore | 70 mm | 30 – 120 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Socket depth for inserted pipe | 30 mm | 15 – 80 |
| Bend centreline radius | 50 mm | 35 – 100 |
| Straight run after the bend | 10 mm | 0 – 60 |
| Fan flare length | 70 mm | 30 – 150 |
| Fan outlet width | 200 mm | 80 – 300 |
| Fan outlet height | 26 mm | 12 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
90 Degree Elbow with Perpendicular Cross Holes
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
D120 Flange
make flange of diameter 120mm with 10mm thickness