Fittings and adapters
Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.
221 models matchClear filters
5-Piece Planter Set: Inner Pot + 4 Decorative Outer Pots
Create ONE STL file containing exactly 5 separate objects arranged side by side: 1 inner pot and 4 decorative outer pots. Inner pot: 70 mm high, 88 mm upper outer diameter, 3 mm w
Train Knuckle Coupler with Can Cradle
Train knuckle coupler that can hold a soda/pop can
Parametric Flanged Bushing
// ========================================== // 參數化帶孔法蘭軸套 (Parametric Flanged Bushing) // ========================================== // --- 尺寸參數設定 --- inner_dia = 20; // 內
Flanged NPT Threaded Shaft with Flanged Nut
I NEED A ROUND SHAFT 1/2" IN DIAMETER 7/8" LONG END TO END, WITH THREADS ON ONE END, MAYBE NPT 1/2" THREADS RUNNING 1/2" DEEP ON ONE END OF THE SHAFT. THE SHAFT IS TO HAVE A 5/1
Liquid Rocket Engine Nozzle (Sea-Level Test)
make a liquid engine nozzle for rocket best for testing purpose on earth
Shaft with Flange and 4 Bolt Holes
A cylindrical shaft with a flange at one end and four equally spaced bolt holes.
Raptor 4 Engine Assembly
Raptor 4 rocket engine. Full-flow staged combustion. 308 tf thrust, 380 bar. Vertical Y-axis. Suspended from spherical gimbal (R=150 mm) at Y+1500. Structural cone Y=0 to +1300, e
3-Way Elbow Connector
Can I please have a 3 way elbow connector that has 6.55mm holes and an outer diameter of 10mm
C-Frame with W8x32 Beam and Schedule 40 Pipe
Generate a parametric 2D structural frame with a C-shaped orientation based on the following specific constraints and dimensions: 1. Base structure: Main layout width is exactly 10
Transition Fitting
Create the Transition Fitting (Fitting Component) 1. In the assembly menu, click Assemble → New Component and name it Fitting. 2. Select Create Sketch on the XZ (Front) plane. 3. D
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Straight Walled Adapter Tube
I need an straight walled adaptor tube to adapt a vent hose to another round coupling. One end of the tube outside diameter needs to be 2.640", the other end inside diameter needs
Parametric Cord Spool
Create ONE removable, 3D-printable cylindrical cord spool for a wearable demonstration device. PURPOSE: The spool stores and smoothly retracts exactly 5 metres (5000 mm) of braide
Universal Coupling Assembly for 1/4 in Galvanized Pipe
Universal coupling for galvanized pipe, 1/4-inch inlet diameter and 1/4-inch outlet diameter.
Model Rocket Fin Set Assembly
For each fin set, the fins should be connected to the adapter creating an assemble.
Five-Pot Set with Raised Patterns
Create one STL file containing 5 separate hollow pots arranged side by side: 1 inner pot and 4 outer pots. Inner pot: 70 mm high, 88 mm outer diameter, 85mm inner diameter, 3 mm w
Slim Humanoid Frame - MG90 Shoulder/Elbow/Hip/Knee Joints
Hey, I think you make the hands and legs together. My requirements are that make the hands separately and legs separately. Make the joints for legs on hips and on knees, and for ha
Class 150 Steel Flange (200 OD x 50 Bore x 10 THK)
Design a steel flange the outer diameter= 200 mm and the inner diameter is 50mm , the thickness is 10 mm , the material is st 37 , flange class 150
Rev G Gauge Pod Mount Assembly
Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 60 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • H
Fan Duct Adapter 105x33 to 57x30
I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve, 5mm for transition between 2 20mm sections.
Shaft with Keyway and Chamfer
Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tan
Turbojet Engine Assembly TJ150
Outer diameter* 246 mm Length (including exhaust nozzle) 730 mm 28.74 in
HELIX — Combustion Chamber & Bell Nozzle
i want just nozzle romove other things and keep combustion chamber and nozzle
Adapterplatte 52/75 mit Rechteck-Ausschnitt
Eine 10mm dicke, quadratische Adapterplatte mit vier M3-Löchern im exakten Abstand von 52x52mm die 5mm erhöht liegen und vier weiteren Löchern im Abstand von 75x75 mm. Innerhalb de
Showing 24 of 221 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
