856 models

Gears and transmission

Spur gears, sprockets, pulleys and timing components with the tooth counts and modules written into the prompt. Download the STEP file and change the numbers.

3D preview of URI_Sense Point-of-Care Reader Enclosure (Exploded 5-Part)644.0 × 80.0 × 50.0 mmPrecision

URI_Sense Point-of-Care Reader Enclosure (Exploded 5-Part)

Model a point-of-care medical device enclosure named "URI_Sense" in millimeters (mm) with separate components: 1. Base Enclosure: Create a solid box 160 mm (X) x 80 mm (Y) x 50 mm

STEPSTLGLB57 PARAMS
3D preview of 12-Tooth Plastic Spur Gear with Pin-Hole Extension13.0 × 13.0 × 12.0 mmPrecision

12-Tooth Plastic Spur Gear with Pin-Hole Extension

3d printing parameters for plastic spur gear Internal diameter: 5mm External diameter tip to tip: 10.5 to 11 mm. Total height: 12 mm Gear height: 8 mm Extension height: 4 mm Gear'

STEPSTLGLB11 PARAMS
3D preview of Three-Level Rail-Mounted Hazelnut Drying Machine12950.0 × 6000.0 × 2700.0 mmPrecision

Three-Level Rail-Mounted Hazelnut Drying Machine

Create a conceptual 3D CAD model of a complete three-level rail-mounted hazelnut drying machine. Use millimeters. DRYING SYSTEM: - 3 drying levels. - 10 sliding trays per level, 3

STEPSTLGLB40 PARAMS
89.0 × 89.0 × 15.6 mmPrecision

bevel gear test

test of miter gear generation

STEPSTLGLB3 PARAMS
3D preview of Crown Gear and Pinion Set 5:168.0 × 62.0 × 14.0 mmPrecision

Crown Gear and Pinion Set 5:1

make a crown gear set with the gear ration is 5:1 small gear have 12 teeth, big gear has 60 teeth with module 1, big gear id is 25 mm small gear id is 2.3 mm gear teeth is 5 mm lon

STEPSTLGLB14 PARAMS
3D preview of Cordless Drill Gearbox Housing80.0 × 80.0 × 66.0 mmPrecision

Cordless Drill Gearbox Housing

Create a cylindrical cordless-drill gearbox housing as a single manufacturable plastic component. The main body should be a hollow cylindrical shell with a stepped outer diameter.

STEPSTLGLB14 PARAMS
3D preview of Two-Stage Compound Spur Gearbox (Exploded Part Set)4059.8 × 300.0 × 102.5 mmPrecision

Two-Stage Compound Spur Gearbox (Exploded Part Set)

Create a **parametric 3D CAD model of a two-stage compound spur gearbox**. Use four module-2, 20° pressure-angle spur gears arranged **116T→31T and 116T→31T**, with **20 mm face wi

STEPSTLGLB55 PARAMS
3D preview of Meat Grinder Idler Gear (Helical 72.5°)68.0 × 68.0 × 32.0 mmPrecision

Meat Grinder Idler Gear (Helical 72.5°)

This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right 72,5 degrees), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.

STEPSTLGLB8 PARAMS
520.1 × 102.0 × 24.1 mmPrecision

65 mm 12-Point Nozzle Ring Spanner

Design a heavy-duty custom ring spanner specifically for removing and installing an injection molding machine nozzle. The nozzle has a hexagonal wrenching section with a nominal W

STEPSTLGLB12 PARAMS
3D preview of 150cc Naked Streetfighter Motorcycle1912.8 × 805.0 × 1132.6 mmPrecision

150cc Naked Streetfighter Motorcycle

Rebuild this existing full motorcycle as a realistic, production-inspired 150cc naked streetfighter motorcycle, not a blocky Minecraft or low-poly model. Use the uploaded reference

STEPSTLGLB13 PARAMS
90.0 × 90.0 × 110.0 mmPrecision

Design Plate 2 - Pump Shaft Bearing Seat & Gear Hub Assembly

Design Plate 2 tolerance and fit design: 50 mm pump shaft with bearing seat (k5), gear hub seat (H7/s6), bearing inner ring, gear hub and parallel key. Mid-tolerance dimensions fro

STEPSTLGLB19 PARAMS
3D preview of 3-Axle Hydraulic Gooseneck Lowbed Semi-Trailer18045.0 × 6000.0 × 3931.1 mmPrecision

3-Axle Hydraulic Gooseneck Lowbed Semi-Trailer

Create a parametric 3D CAD model of a 3-axle hydraulic gooseneck lowbed semi-trailer (heavy equipment hauler). Units: millimeters. Coordinate system: X = length (X=0 at the front t

STEPSTLGLB70 PARAMS
110.0 × 60.0 × 10.0 mmPrecision

Rotary Shaker Twin V-Groove Pulley Drive

Create a single 3D solid model representing the drive mechanism of a rotary shaker. Units: millimeters (mm). Do NOT create an assembly. Create one combined part. - Create a larg

STEPSTLGLB9 PARAMS
50.0 × 58.2 × 210.1 mmPrecision

Kayak Fishing Rod Holder Assembly

Important: * DO NOT model or include the kayak rail or track. * DO NOT create the rail as part of the model. * Only create the rod holder assembly and the sliding track adapter th

STEPSTLGLB23 PARAMS
140.0 × 90.0 × 21.0 mmPrecision

Mini 2WD Arduino Robot Chassis

Create a compact 3D-printable chassis for a miniature two-wheel Arduino robot car. The chassis should be a single-piece rectangular base with rounded corners. Include two symmetric

STEPSTLGLB23 PARAMS
738.4 × 400.0 × 872.9 mmPrecision

Mobile Robot with Telescopic Arm and Platform

Su estructura consiste en una base móvil con ruedas omnidireccionales, un brazo telescópico articulado y una plataforma de carga. Gracias a sus motores eléctricos y sensores, puede

STEPSTLGLB15 PARAMS
3D preview of Hexacopter Airframe Frame650.0 × 569.6 × 198.0 mmPrecision

Hexacopter Airframe Frame

| Parameter | Conceptual target | |---|---:| | Configuration | Hexacopter | | Overall diameter | ~1.2–1.5 m | | Propellers | 6 | | Landing gear | 4-leg or 6-leg | | Payload | ~2–4

STEPSTLGLB18 PARAMS
3D preview of Rod with Spur Gear110.0 × 50.0 × 49.9 mmPrecision

Rod with Spur Gear

Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm

STEPSTLGLB6 PARAMS
99.9 × 54.0 × 8.1 mmPrecision

three_gear_ratio_set

make a ratio with three progressively smaller gears that could fit into a fairly small box

STEPSTLGLB6 PARAMS
3D preview of Adjustable Sink-Edge Mount v2 (matches water gearbox v5)132.0 × 190.6 × 49.0 mmPrecision

Adjustable Sink-Edge Mount v2 (matches water gearbox v5)

Adjustable sink-edge mount updated for the current water gearbox (v5): ring frame now carries the bottom cap with its six outer bolt ears and funnel clearance, the locating lip fol

STEPSTLGLB28 PARAMS
281.8 × 121.7 × 78.5 mmPrecision

Chainable Coaxial Oil-Tight Gearbox with Guide Rail

End-to-end chainable version of the oil-tight mostly-printed herringbone gearbox. The two stages are now coaxial (input and output on the same centre line, countershaft beside them

STEPSTLGLB35 PARAMS
3D preview of Partner Halloween Trophy90.0 × 50.0 × 52.5 mmPrecision

Partner Halloween Trophy

Can you create a Partner Halloween trophy. It consists of a bat, 2 gears and a base with space to put a plaque on. The gears are on separate plaques but the bat is standing on both

STEPSTLGLB16 PARAMS
3D preview of Double Single Roller Sprocket ANSI #80159.0 × 159.3 × 34.4 mmPrecision

Double Single Roller Sprocket ANSI #80

Draw me a double single roller sprocket to suit a ANSI#80 chain with a 1inch pitch and 18 teeth

STEPSTLGLB8 PARAMS
3D preview of Mating Spur Gear Pair - 20T Module 8334.9 × 176.0 × 20.1 mmPrecision

Mating Spur Gear Pair - 20T Module 8

now can you add another gear to mate with the present one. Both of the gear should have same module and the gear should possess 20 teeth

STEPSTLGLB6 PARAMS

Showing 24 of 856 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.