URI_Sense Point-of-Care Reader Enclosure (Exploded 5-Part)

Model a point-of-care medical device enclosure named "URI_Sense" in millimeters (mm) with separate components: 1. Base Enclosure: Create a solid box 160 mm (X) x 80 mm (Y) x 50 mm (Z). Shell it from the top with 2.5 mm uniform wall thickness. Add 3 mm interior corner fillets and four internal screw bosses (diameter 6 mm, M3 pilot hole 2.5 mm) at the corners. Cut a USB-C port (9 mm x 3.2 mm) on the front-lower wall. 2. Optical Readout Chamber: On the left floor inside the base, model an internal light-isolation wall compartment (35 mm x 35 mm x 30 mm) with a 12 mm x 8 mm aperture slot cut through its floor for strip scanning. Mount an AS7341 sensor bracket (20 mm x 20 mm) above the aperture. 3. Sliding Tray & Linear Guide: Create a sliding assay tray body 145 mm (X) x 25 mm (Y) x 6 mm (Z). On the top face, cut a recessed strip pocket (115 mm x 5 mm x 1.5 mm) containing 10 evenly spaced pad indentations (5 mm x 5 mm each). Extrude a linear gear rack profile along the lower right edge of the tray. 4. Actuator & Homing Bracket: Model an N20 micro gear motor body (12 mm x 10 mm x 24 mm) with a 3 mm D-shaft pinion gear meshing to the tray rack, and a mounting bracket for a subminiature limit switch at the tray home position. 5. Top Enclosure Lid: Create a matching top cover (160 mm x 80 mm x 15 mm, 2.5 mm wall thickness) with a lip-and-groove mating perimeter. Cut a rectangular window (26 mm x 14 mm) centered on the top face for a 0.96-inch OLED status display. Keep all elements as distinct editable components.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.