Gears and transmission
Mating Spur Gear Pair - 20T Module 8
- Bounding box
- 334.9 × 176.0 × 20.1 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
now can you add another gear to mate with the present one. Both of the gear should have same module and the gear should possess 20 teeth
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 8 mm | 0.5 – 20 |
| Pitch Diameter | 160 mm | 20 – 500 |
| Pressure Angle | 20 deg | 10 – 30 |
| Tooth Height | 9 mm | 2 – 40 |
| Face Width | 20 mm | 2 – 80 |
| Bore Diameter | 20 mm | 2 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled