Gears and transmission
Hexacopter Airframe Frame
- Bounding box
- 650.0 × 569.6 × 198.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
| Parameter | Conceptual target | |---|---:| | Configuration | Hexacopter | | Overall diameter | ~1.2–1.5 m | | Propellers | 6 | | Landing gear | 4-leg or 6-leg | | Payload | ~2–4 kg | | Battery | Large high-voltage Li-ion/LiPo pack | | Flight controller | Pixhawk/Cube-class | | AI computer | NVIDIA Jetson-class | | Main camera | 4K RGB | | Zoom camera | 20–30× optical PTZ | | Thermal | Radiometric thermal camera | | Obstacle sensing | LiDAR + depth cameras | | Navigation | GNSS/RTK + IMU + barometer | | Communications | 4G/5G + dedicated telemetry | | Emergency audio | Speaker + microphone | | Drone detection | RF/Remote-ID receiver + optical confirmation |
Parameters
| Name | Value | Range |
|---|---|---|
| Center Plate Dia | 200 mm | 120 – 400 |
| Center Plate Thickness | 6 mm | 3 – 20 |
| Number of Arms / Motors | 6 ea | 4 – 8 |
| Arm Length (center to motor) | 300 mm | 150 – 500 |
| Arm Width | 30 mm | 15 – 60 |
| Arm Thickness | 12 mm | 6 – 30 |
| Motor Pad Dia | 50 mm | 30 – 90 |
| Motor Pad Thickness | 6 mm | 3 – 15 |
| Motor Bolt Circle Dia | 25 mm | 12 – 60 |
| Motor Bolt Hole Dia | 3.2 mm | 2 – 8 |
| Bolts per Motor | 4 ea | 3 – 6 |
| Motor Pad Rim Fillet | 2 mm | 0 – 2.4 |
| Number of Landing Legs | 6 ea | 3 – 8 |
| Leg Mount Radius | 80 mm | 30 – 150 |
| Leg Length | 180 mm | 80 – 350 |
| Leg Tube Dia | 12 mm | 6 – 30 |
| Foot Pad Dia | 30 mm | 15 – 60 |
| Foot Pad Thickness | 8 mm | 3 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled