Gears and transmission
Partner Halloween Trophy
- Bounding box
- 90.0 × 50.0 × 52.5 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Can you create a Partner Halloween trophy. It consists of a bat, 2 gears and a base with space to put a plaque on. The gears are on separate plaques but the bat is standing on both of them. The bat splits in half so each plaque takes half a hat. The gears interlock when placed side by side to make the bat uniform.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 90 mm | 50 – 150 |
| Base Width | 50 mm | 30 – 100 |
| Base Height | 10 mm | 5 – 30 |
| Plaque Pocket Width | 40 mm | 20 – 80 |
| Plaque Pocket Height | 20 mm | 10 – 50 |
| Plaque Pocket Depth | 2 mm | 0 – 5 |
| Gear Module | 2 mm | 0.5 – 4 |
| Gear Teeth | 16 | 5 – 40 |
| Gear Face Width | 8 mm | 3 – 20 |
| Gear Bore Diameter | 6 mm | 2 – 20 |
| Gear Mesh Clearance | 0.2 mm | 0 – 1 |
| Bat Half Wingspan | 35 mm | 15 – 60 |
| Bat Body Height | 28 mm | 10 – 60 |
| Bat Thickness | 6 mm | 2 – 15 |
| Bat-Gear Overlap | 0.5 mm | 0 – 2 |
| Bat Split Gap | 1 mm | 0.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled