Gears and transmission
Crown Gear and Pinion Set 5:1
- Bounding box
- 68.0 × 62.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
make a crown gear set with the gear ration is 5:1 small gear have 12 teeth, big gear has 60 teeth with module 1, big gear id is 25 mm small gear id is 2.3 mm gear teeth is 5 mm long, total gear width including teeth hight is 6mm. small gear teeth is 5 mm long and total gear length is 5mm. there is a gub screw hole at the surfce of small gear flat surfacce not on to teeth surface.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1 mm | 0.5 – 3 |
| Large Gear Teeth | 60 | 20 – 200 |
| Small Pinion Teeth | 12 | 5 – 50 |
| Large Gear Bore | 25 mm | 1 – 100 |
| Large Gear Pitch Diameter | 60 mm | 10 – 200 |
| Large Gear Outside Diameter | 62 mm | 10 – 220 |
| Large Gear Root Diameter | 57.5 mm | 5 – 220 |
| Large Gear Total Width | 6 mm | 2 – 30 |
| Large Gear Tooth Length | 5 mm | 0.5 – 20 |
| Small Pinion Bore | 2.3 mm | 0.5 – 20 |
| Small Pinion Pitch Diameter | 12 mm | 5 – 80 |
| Small Pinion Outside Diameter | 14 mm | 5 – 90 |
| Small Pinion Width | 5 mm | 1 – 30 |
| Grub Screw Hole Diameter | 1 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a