Fittings and adapters
Fan Duct Adapter 105x33 to 57x30
- Bounding box
- 129.0 × 57.0 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve, 5mm for transition between 2 20mm sections. Walls 1.25mm thick.
Parameters
| Name | Value | Range |
|---|---|---|
| Large End Width (X) | 105 mm | 20 – 300 |
| Large End Height (Y) | 33 mm | 10 – 200 |
| Small End Width (X) | 57 mm | 10 – 250 |
| Small End Height (Y) | 30 mm | 10 – 200 |
| Sleeve Length (each end) | 20 mm | 5 – 80 |
| Transition Length | 5 mm | 2 – 80 |
| Wall Thickness | 1.25 mm | 0.4 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio