Fittings and adapters
Tapered Drainage Basket
- Bounding box
- 103.2 × 97.6 × 107.1 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensions: * Length: 93.20 mm * Width: 87.60 mm * Bottom outside dimensions: * Length: 77.00 mm * Width: 73.60 mm * The taper must be continuous and uniform from the top to the bottom on all four sides. * The top must include a 5 mm outward flange (brim/lip) around the entire perimeter so the basket can rest in a dish drying rack. * All four vertical corners should have approximately a 5 mm radius. * The top remains completely open. * The bottom is flat and contains a centered 6 × 6 grid of circular drainage holes. * Drainage hole diameter: 5.0 mm. * Space the holes evenly while maintaining adequate material between holes and around the outer edge for strength. * The model should be watertight (manifold), optimized for FDM 3D printing, require no supports, and be exported as an STL file. * Units: millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 99 mm | 50 – 200 |
| Top Outside Length | 93.2 mm | 50 – 300 |
| Top Outside Width | 87.6 mm | 50 – 300 |
| Bottom Outside Length | 77 mm | 30 – 200 |
| Bottom Outside Width | 73.6 mm | 30 – 200 |
| Wall Thickness | 1 mm | 0.5 – 5 |
| Bottom Thickness | 1.5 mm | 0.5 – 5 |
| Corner Radius | 5 mm | 1 – 20 |
| Flange Width | 5 mm | 2 – 20 |
| Flange Thickness | 1.5 mm | 0.5 – 5 |
| Drainage Hole Diameter | 5 mm | 2 – 15 |
| Hole Grid Rows | 6 | 2 – 12 |
| Hole Grid Columns | 6 | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole