Fittings and adapters
Adapterplatte 52/75 mit Rechteck-Ausschnitt
- Bounding box
- 100.0 × 100.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Eine 10mm dicke, quadratische Adapterplatte mit vier M3-Löchern im exakten Abstand von 52x52mm die 5mm erhöht liegen und vier weiteren Löchern im Abstand von 75x75 mm. Innerhalb der 52x52mm mit einem abstand von 2mm ein rechteckiger ausschnitt
Parameters
| Name | Value | Range |
|---|---|---|
| Plattengroesse | 100 mm | 60 – 200 |
| Plattendicke | 10 mm | 4 – 30 |
| Lochraster M3 (erhoeht) | 52 mm | 24 – 120 |
| Lochraster aussen | 75 mm | 30 – 160 |
| Lochdurchmesser | 3.4 mm | 2 – 10 |
| Sockelbreite (quadratisch) | 60 mm | 45 – 100 |
| Sockelhoehe | 5 mm | 0 – 20 |
| Kantenradius Sockel | 1.5 mm | 0 – 4 |
| Abstand Ausschnitt zum 52er Raster | 2 mm | 1 – 12 |
| Eckenradius Ausschnitt | 3 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end