Fittings and adapters
Five-Pot Set with Raised Patterns
- Bounding box
- 616.5 × 105.0 × 80.1 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create one STL file containing 5 separate hollow pots arranged side by side: 1 inner pot and 4 outer pots. Inner pot: 70 mm high, 88 mm outer diameter, 85mm inner diameter, 3 mm wall thickness, 5 mm bottom thickness and 4 drainage holes. Keep it plain and smooth. Outer pots: All 4 must be identical in size: 80 mm high, 100mm outer diameter, 90 mm inner diameter, 5 mm wall thickness and 5 mm bottom thickness. They must have straight vertical walls, a flat bottom and an open top. The inner pot must fit inside all four and be removable. Design: Give each outer pot a different, subtle floral pattern: rounded petals, flowing botanical curves, soft waves and abstract overlapping petals. Keep the shapes organic, smooth, rounded and minimalist. The patterns should be slightly raised, without sharp edges or fragile details. 3D printing: Optimize all parts for PLA and a 0.4 mm nozzle. Make the geometry clean, printable and preferably support-free. Important: Export everything in ONE STL file, with all 5 parts separate and not touching. Do not connect the pots together or create additional parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 130 mm | 110 – 250 |
| Inner Pot Height | 70 mm | 30 – 120 |
| Inner Pot OD | 88 mm | 60 – 120 |
| Inner Pot ID | 85 mm | 50 – 110 |
| Inner Pot Bottom | 5 mm | 2 – 10 |
| Drain Hole Diameter | 5 mm | 2 – 10 |
| Drain Hole Circle | 40 mm | 20 – 70 |
| Outer Pot Height | 80 mm | 40 – 120 |
| Outer Pot OD | 100 mm | 70 – 140 |
| Outer Pot ID | 90 mm | 60 – 130 |
| Outer Pot Bottom | 5 mm | 2 – 10 |
| Pattern Bump Radius | 3.5 mm | 2.5 – 6 |
| Pattern Inside Clearance | 0.5 mm | 0.3 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole