Fittings and adapters
Low Loss Header Assembly
- Bounding box
- 584.4 × 446.2 × 1369.1 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1230 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark): * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP connection line. Bottom DN200 Blank flange requires a central 1" BSP connection line. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 200 – 300 |
| Barrel Wall Thickness | 8.18 mm | 4 – 20 |
| Barrel Length | 1230 mm | 500 – 2000 |
| Top Flange OD | 340 mm | 300 – 400 |
| Top Flange Thickness | 24 mm | 10 – 50 |
| Top 1/2" BSP Tap Drill Diameter | 19 mm | 10 – 30 |
| Bottom Flange OD | 340 mm | 300 – 400 |
| Bottom Flange Thickness | 24 mm | 10 – 50 |
| Bottom 1" BSP Tap Drill Diameter | 30.5 mm | 20 – 40 |
| DN65 Stub OD | 76.1 mm | 60 – 100 |
| DN65 Nozzle Bore | 65 mm | 50 – 80 |
| DN65 Flange OD | 185 mm | 150 – 250 |
| DN65 Flange Thickness | 18 mm | 10 – 30 |
| DN65 Nozzle Projection | 150 mm | 100 – 250 |
| DN80 Stub OD | 88.9 mm | 70 – 120 |
| DN80 Nozzle Bore | 80 mm | 60 – 100 |
| DN80 Flange OD | 200 mm | 150 – 250 |
| DN80 Flange Thickness | 20 mm | 10 – 30 |
| DN80 Nozzle Projection | 180 mm | 100 – 300 |
| DN65 Front@100 Height from Top | 100 mm | 0 – 1400 |
| DN65 Front@100 Angle (front=0) | 0 ° | 0 – 360 |
| DN80 Rear@100 Height from Top | 100 mm | 0 – 1400 |
| DN80 Rear@100 Angle (rear=180) | 180 ° | 0 – 360 |
| DN65 Right@400 Height from Top | 400 mm | 0 – 1400 |
| DN65 Right@400 Angle (right=90) | 90 ° | 0 – 360 |
| DN65 Right@945 Height from Top | 945 mm | 0 – 1400 |
| DN65 Right@945 Angle (right=90) | 90 ° | 0 – 360 |
| DN65 Front@1245 Height from Top | 1245 mm | 0 – 1400 |
| DN65 Front@1245 Angle (front=0) | 0 ° | 0 – 360 |
| DN80 Rear@1245 Height from Top | 1245 mm | 0 – 1400 |
| DN80 Rear@1245 Angle (rear=180) | 180 ° | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con