Fittings and adapters
Low Loss Header Assembly
- Bounding box
- 456.4 × 398.2 × 1405.1 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1345 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark): * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP connection line. Bottom DN200 Blank flange requires a central 1" BSP connection line. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 150 – 300 |
| Barrel Wall Thickness | 8.18 mm | 4 – 15 |
| Barrel Length | 1345 mm | 800 – 2000 |
| Main Flange Thickness | 30 mm | 20 – 50 |
| Main Flange OD | 340 mm | 300 – 400 |
| Top Instrument Hole OD (1/2" BSP) | 21.3 mm | 15 – 30 |
| Bottom Instrument Hole OD (1" BSP) | 33.4 mm | 25 – 50 |
| DN65 Nozzle Pipe OD | 76.1 mm | 50 – 100 |
| DN65 Nozzle Flange OD | 185 mm | 130 – 250 |
| DN80 Nozzle Pipe OD | 88.9 mm | 60 – 120 |
| DN80 Nozzle Flange OD | 200 mm | 150 – 280 |
| Nozzle Projection Length | 100 mm | 50 – 200 |
| Nozzle Flange Thickness | 20 mm | 10 – 40 |
| Nozzle 1 Height from Top | 100 mm | 50 – 1345 |
| Nozzle 1 Angle (deg) | 0 deg | 0 – 360 |
| Nozzle 1 Type (65=DN65, 80=DN80) | 65 | 65 – 80 |
| Nozzle 2 Height from Top | 100 mm | 50 – 1345 |
| Nozzle 2 Angle (deg) | 180 deg | 0 – 360 |
| Nozzle 2 Type (65=DN65, 80=DN80) | 80 | 65 – 80 |
| Nozzle 3 Height from Top | 400 mm | 50 – 1345 |
| Nozzle 3 Angle (deg) | 90 deg | 0 – 360 |
| Nozzle 3 Type (65=DN65, 80=DN80) | 65 | 65 – 80 |
| Nozzle 4 Height from Top | 945 mm | 50 – 1345 |
| Nozzle 4 Angle (deg) | 90 deg | 0 – 360 |
| Nozzle 4 Type (65=DN65, 80=DN80) | 65 | 65 – 80 |
| Nozzle 5 Height from Top | 1245 mm | 50 – 1345 |
| Nozzle 5 Angle (deg) | 0 deg | 0 – 360 |
| Nozzle 5 Type (65=DN65, 80=DN80) | 65 | 65 – 80 |
| Nozzle 6 Height from Top | 1245 mm | 50 – 1345 |
| Nozzle 6 Angle (deg) | 180 deg | 0 – 360 |
| Nozzle 6 Type (65=DN65, 80=DN80) | 80 | 65 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con