Oldham-type coupling v2 (insert with Ø36 recess)

2 views

Bounding box: 96.3 × 96.2 × 130.1 mm
Engine: Precision B-rep
Parameters: 19
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Oldham-type coupling from AGH drawings 00.04.01 / 00.04.02 / 00.04.03, insert now with the central Ø36 recess

Parameters

Name	Value	Range
Flange diameter	96 mm	60 – 150
Hub body length	55 mm	30 – 100
Flange (cylindrical) length	15 mm	5 – 30
Hub neck length	15 mm	5 – 30
End chamfer (45°)	2 mm	0.5 – 4
Tab length	10 mm	5 – 15
Tab width	20 mm	10 – 40
Keyway width	10 mm	4 – 16
Hub 1 bore diameter	36 mm	20 – 50
Hub 1 neck diameter	56 mm	40 – 80
Hub 1 keyway top above axis	22 mm	19 – 30
Hub 2 bore diameter	48 mm	30 – 60
Hub 2 neck diameter	68 mm	50 – 90
Hub 2 keyway top above axis	28 mm	25 – 36
Insert thickness	20 mm	10 – 40
Insert slot width	20 mm	10 – 40
Insert slot depth	10 mm	5 – 15
Insert round recess diameter	36 mm	20 – 60
Insert round recess depth	10 mm	2 – 15

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

26.3 × 26.3 × 7.6 mmPrecision

SM1 to RMS Thread Adapter

thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.

STEPSTLGLB5 PARAMS

26 × 26 × 15 mm3D Printing

Shouldered Spacer 20/26 x 15

Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness

STLGLB6 PARAMS

143.0 × 75.0 × 40.0 mmPrecision

Temperature Controller Case with Power Adapter End

resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter

STEPSTLGLB19 PARAMS

30 × 20 × 40 mm3D Printing

90 Degree Elbow with Perpendicular Cross Holes

elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.

STLGLB7 PARAMS

40 × 40 × 15 mm3D Printing

Cylindrical D-Shaft Flange

Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan

STLGLB6 PARAMS

120 × 120 × 10 mm3D Printing

D120 Flange

make flange of diameter 120mm with 10mm thickness

STLGLB7 PARAMS