Fittings and adapters
Combination Lock Housing
- Bounding box
- 86 × 80 × 67 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a circular base, outer diameter 80 mm, height 40 mm, wall thickness 2.2 mm. Inside, place two stacked circular spools on a central axle. Each spool has a 65 mm flange diameter and 14 mm height. Total stack height 35 mm. Add two opposite side slots, 12 mm wide by 3 mm high, with 1 mm edge radius, for flat bands to exit. Central axle diameter 8 mm. Rounded outer edges. Prototype concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Base outer diameter | 80 mm | 60 – 120 |
| Base height | 40 mm | 30 – 80 |
| Wall thickness | 2.2 mm | 1.2 – 6 |
| Lid height | 18 mm | 10 – 30 |
| Lid twist angle | 70 deg | 0 – 90 |
| Band width | 10 mm | 6 – 20 |
| Band thickness | 1.2 mm | 0.8 – 3 |
| Central axle diameter | 8 mm | 6 – 20 |
| Axle length | 45 mm | 35 – 60 |
| Spool flange diameter | 65 mm | 50 – 75 |
| Spool height | 14 mm | 10 – 25 |
| Spool core diameter | 20 mm | 12 – 30 |
| Gap between spools | 7 mm | 0 – 15 |
| Lock ring inner diameter | 68 mm | 55 – 74 |
| Pawl diameter | 6 mm | 4 – 10 |
| Pawl length | 12 mm | 8 – 20 |
| Spring outer diameter | 5 mm | 4 – 8 |
| Spring free length | 10 mm | 6 – 16 |
| Jaw length | 12 mm | 8 – 20 |
| Band slot width | 12 mm | 8 – 20 |
| Band slot height | 3 mm | 2 – 8 |
| Slot edge radius | 1 mm | 0.5 – 1.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
