Fittings and adapters
Pneumatic Cylinder Assembly
- Bounding box
- 61.0 × 61.0 × 237.0 mm
- Engine
- Precision B-rep
- Parameters
- 47
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and standart parts are: Rod seal and wiper, Snap ring, Cushioning seal, O-ring, Retaining ring, Socket head cap screw
Parameters
| Name | Value | Range |
|---|---|---|
| Bore Diameter | 32 mm | 16 – 80 |
| Barrel Wall | 2.5 mm | 1 – 6 |
| Stroke | 100 mm | 20 – 300 |
| Piston Rod Diameter | 12 mm | 4 – 40 |
| Rod Extension | 40 mm | 0 – 150 |
| Piston Length | 20 mm | 5 – 60 |
| Cushioning Piston Length | 15 mm | 5 – 50 |
| Piston Groove Width | 3 mm | 1 – 8 |
| Piston Groove Depth | 1.5 mm | 0.3 – 4 |
| End Cap Size | 50 mm | 30 – 120 |
| End Cap Length | 10 mm | 4 – 30 |
| Spigot Length | 6 mm | 2 – 20 |
| Port Diameter | 6 mm | 2 – 20 |
| Port Offset | 15 mm | 0 – 40 |
| Tie Rod Diameter | 5 mm | 2 – 12 |
| Tie Rod PCD | 40 mm | 20 – 100 |
| Tie Rod Count | 4 count | 2 – 12 |
| Socket Head Diameter | 9 mm | 4 – 20 |
| Socket Head Height | 5 mm | 2 – 15 |
| Tie Rod Protrusion | 8 mm | 0 – 30 |
| Guide Bushing OD | 22 mm | 14 – 50 |
| Guide Bushing Bore | 12.4 mm | 5 – 42 |
| Guide Bushing Length | 6 mm | 2 – 20 |
| Rod Seal OD | 24 mm | 14 – 50 |
| Rod Seal Bore | 12.4 mm | 5 – 42 |
| Rod Seal Height | 3 mm | 1 – 10 |
| Cylinder Flange OD | 61 mm | 40 – 140 |
| Flange Thickness | 8 mm | 3 – 25 |
| Flange Bolt Diameter | 5.5 mm | 2 – 12 |
| Flange Bolt PCD | 53 mm | 30 – 130 |
| Flange Bolt Count | 4 count | 2 – 12 |
| Cushion Screw Diameter | 5 mm | 2 – 12 |
| Cushion Screw Protrusion | 12 mm | 4 – 40 |
| Cushion Screw Head Dia | 8 mm | 4 – 20 |
| Cushion Screw Head Height | 4 mm | 2 – 12 |
| Snap Ring OD | 26 mm | 14 – 60 |
| Snap Ring ID | 22 mm | 8 – 56 |
| Snap Ring Thickness | 1.5 mm | 0.5 – 5 |
| Cushioning Seal OD | 31 mm | 18 – 78 |
| Cushioning Seal ID | 30.4 mm | 16 – 76 |
| Cushioning Seal Thickness | 2 mm | 0.5 – 8 |
| O-Ring OD | 34 mm | 18 – 82 |
| O-Ring ID | 31.2 mm | 16 – 80 |
| O-Ring Thickness | 2 mm | 0.5 – 8 |
| Retaining Ring OD | 30 mm | 14 – 70 |
| Retaining Ring ID | 26 mm | 8 – 66 |
| Retaining Ring Thickness | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Under Door Split AC Exhaust Adapter
I have a portable AC unit I want to use in my garage. i want to use an under the door style adapter. Source Image 1 (Front - under door rectangular): Height is 1.5 inch (convert
Inline Hose Adapter with Sensor Boss
Create a cylindrical inline hose adapter tube for automotive cooling. Total length is 65mm. The main central body is a cylinder with an outer diameter of 20mm and a length of 25mm.
MCR Building Cable Entry Fitting
an you help me to desigen firfitting for mcr buillding for 10 mw solar power plant
Garage Door Exhaust Hose Adapter
I have a portable AC unit I want to use in my garage. I will use a board as an insert at the bottom of the garage door, and cut 2 holes for the 2 exhaust hoses. The adapter it came
Gutter Cleaning Wand
i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv
