3D preview of Modular Pyramid Rod Section
Loading the interactive model…
Interactive 3D model of Modular Pyramid Rod Section

Fittings and adapters

Modular Pyramid Rod Section

1 views
Bounding box
36.0 × 36.0 × 236.0 mm
Engine
Precision B-rep
Parameters
14
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wall thickness: 4 mm. - Maximum overall length: 236 mm. - Circular hollow cross-section. - Material: PETG or PA12 nylon. DESIGN: - One end incorporates an integrated male locating interface. - Opposite end incorporates a female receiving interface. - Both interfaces must accommodate a separate internal keyed coupling. - Maintain precise concentric alignment between adjoining sections. - Incorporate anti-rotation geometry to prevent relative rotation. - Connection must support repeated assembly and disassembly. - No permanent adhesive. - No sharp edges. - Reinforce connection-end walls against cracking. APPLICATION: Eight sections form each complete rod. Four inclined rods: 1,793 mm nominal centre-line length. Four horizontal rods: 1,885 mm nominal centre-line length. The connection interfaces must allow adjoining sections to maintain the specified centre-line dimensions without cumulative length errors. DESIGN REQUIREMENT: Generate one complete, watertight, manifold STL suitable for FDM 3D printing. Do not generate the complete pyramid or additional components.

Parameters

NameValueRange
Overall Length236 mm150 – 236
Outer Diameter30 mm20 – 60
Inner Diameter22 mm10 – 50
Male Spigot OD27.6 mm20 – 55
Male Spigot Length30 mm10 – 80
Female Socket ID28 mm20 – 55
Female Socket Depth32 mm10 – 80
Reinforcement Collar OD36 mm30 – 70
Reinforcement Collar Length36 mm10 – 100
Keyway Width4 mm2 – 12
Keyway Depth1.2 mm0.5 – 3
Keyway Count2 pcs1 – 4
Keyway Length50 mm10 – 120
Edge Chamfer0.6 mm0.2 – 1.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of SM1 to RMS Thread Adapter26.3 × 26.3 × 7.6 mmPrecision

SM1 to RMS Thread Adapter

thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.

STEPSTLGLB5 PARAMS
3D preview of Gutter Cleaning Wand8.9 × 70 × 42.5 mm3D Printing

Gutter Cleaning Wand

i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv

STLGLB13 PARAMS
3D preview of Compact Harmonic Drive Reducer (Robot Joint)476.0 × 58.7 × 34.5 mmPrecision

Compact Harmonic Drive Reducer (Robot Joint)

请设计一个用于机器人机械臂关节的紧凑型谐波减速器(Harmonic Drive Reducer)三维 CAD 模型。 **一、整体尺寸与结构要求** - 减速器主体外径约 50mm,目标控制在 45–50mm 范围内。 - 总成最大轴向厚度不超过 50mm,包含安装法兰和支撑脚。 - 整体结构紧凑、对称,适合安装在机器人机械臂关节位置。 - 允许在主体外壳

STEPSTLGLB56 PARAMS
3D preview of Type-M Compact Jumbo Multi-Flame Heating Nozzle32.0 × 32.0 × 54.0 mmPrecision

Type-M Compact Jumbo Multi-Flame Heating Nozzle

Create a compact, short, and heavy-duty custom heating nozzle (Type-M oxy-fuel standard) for metal melting, matching the physical proportions of the reference image. Strictly follo

STEPSTLGLB26 PARAMS
3D preview of Type-M Oxy-Fuel Heating Nozzle (Copper Head + Brass Hex Body)31.2 × 27.0 × 75.0 mmPrecision

Type-M Oxy-Fuel Heating Nozzle (Copper Head + Brass Hex Body)

Create a 3D CAD model and export it as a STEP file for a custom industrial heating nozzle (Type-M oxy-fuel cutting torch mixing head standard) based on the attached technical drawi

STEPSTLGLB19 PARAMS
3D preview of Copper Reducer 35 x 22 (Male-Female)35.1 × 35.0 × 62.0 mmPrecision

Copper Reducer 35 x 22 (Male-Female)

Create a 3D model of a copper pipe reducer, male-to-female (MF), for HVAC and plumbing applications. Technical specifications: - Material: Copper - Male connection: Ø35 mm - Femal

STEPSTLGLB7 PARAMS