292 models

Fittings and adapters

Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.

Page 7 of 13

3D preview of Lip-Held Whistle Body18.1 × 18.1 × 28.0 mmPrecision

Lip-Held Whistle Body

// ======================================================== // COMPACT LIP-HELD WHISTLE CANDY — max whistle strength // Not tuned to a specific frequency — optimized for a // loud

STEPSTLGLB10 PARAMS
606.0 × 456.0 × 400.0 mmPrecision

Assembled access-control cabinet

0. SCOPE AND RULES FOR THE SUPPLIER We want the complete design, 3D printing, finishing, assembly, wiring and hardware test of ONE prototype unit first, then quote for batches. Sco

STEPSTLGLB43 PARAMS
3D preview of Parametric Flanged Bushing60.0 × 60.0 × 40.0 mmPrecision

Parametric Flanged Bushing

// ========================================== // 參數化帶孔法蘭軸套 (Parametric Flanged Bushing) // ========================================== // --- 尺寸參數設定 --- inner_dia = 20; // 內

STEPSTLGLB8 PARAMS
3D preview of G1/8 to V8 Adapter13 × 11.3 × 8 mm3D Printing

G1/8 to V8 Adapter

An 8 mm long adapter with a male G 1/8" external thread and a female V8 internal thread (standard tire valve cap thread).

STLGLB1 PARAMS
112.0 × 57.2 × 82.6 mmPrecision

Reduced Copper Tee 54x28x54 F/F/F (5130R054028054)

Reduced copper tee 54 x 28 x 54, F/F/F brazed capillary fitting (Lombarda Raccordi 5130R054028054), three female sockets, pipe stops, blended junction, STEP export.

STEPSTLGLB11 PARAMS
30.0 × 30.0 × 90.0 mmPrecision

Shaft with Keyway

Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tan

STEPSTLGLB6 PARAMS
3D preview of PETG Blast Gate (0.6 mm nozzle / 0.3 mm layers)177.8 × 118.0 × 39.6 mmPrecision

PETG Blast Gate (0.6 mm nozzle / 0.3 mm layers)

optimize to be printed in petg with a .6mm nozzle and .3mm layer height

STEPSTLGLB23 PARAMS
371.3 × 58.0 × 121.1 mmPrecision

Air Volume V2 angle 50deg

CFD air volume variant: pipe angle 50 deg, junction 77 mm, no nozzle.

STEPSTLGLB14 PARAMS
3D preview of Rev G Gauge Pod - Flange, Upright, Elbow, Display Barrel75.0 × 104.9 × 116.0 mmPrecision

Rev G Gauge Pod - Flange, Upright, Elbow, Display Barrel

Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • H

STEPSTLGLB18 PARAMS
3D preview of Flange Principal com Costelas Explodido16360.2 × 1360.0 × 500.2 mmPrecision

Flange Principal com Costelas Explodido

Desenho da Flange Principal (Vista Superior)Círculo Maior (Externo): Raio $R = 680\text{ mm}$ (Diâmetro $\varnothing 1360\text{ mm}$).Círculo Menor (Interno): Raio $r = 480\text{ m

STEPSTLGLB12 PARAMS
3D preview of Flange with Recess and Keyway60.0 × 160.0 × 160.0 mmPrecision

Flange with Recess and Keyway

Part B: Flange with Recess Step 1 — Revolved body New Part → sketch on the Front Plane the half-profile through (0, 30), (0, 80), (40, 80), (40, 70), (20, 70), (20, 40), (60, 40),

STEPSTLGLB14 PARAMS
46.0 × 46.0 × 170.0 mmPrecision

Collar core (parts 12-16)

Smart acetabular reamer, parts 12-16 in assembled positions (global coordinates, origin at the very rear of the tool on the shaft axis, +Z forward, +Y up): collar hub with arm-trac

STEPSTLGLB15 PARAMS
3D preview of Flexible Light Pipe Adapter Assembly12.0 × 12.0 × 30.0 mmPrecision

Flexible Light Pipe Adapter Assembly

Create cross-section assembly of Universal Flexible Light Pipe Adapter, cylindrical mechanical connector for LED light guide

STEPSTLGLB17 PARAMS
3D preview of Vacuum Nozzle157.2 × 48.2 × 194.0 mmPrecision

Vacuum Nozzle

Vacuum nozzle

STEPSTLGLB8 PARAMS
3D preview of Removable 35 mm Cord Spool (5 m UHMWPE)35.0 × 35.0 × 30.0 mmPrecision

Removable 35 mm Cord Spool (5 m UHMWPE)

Create ONE removable, 3D-printable cylindrical cord spool for a wearable demonstration device. PURPOSE: The spool stores and smoothly retracts exactly 5 metres (5000 mm) of braide

STEPSTLGLB11 PARAMS
3D preview of Stepped Hose Adapter2.1 × 2.1 × 3.3 mmPrecision

Stepped Hose Adapter

Create a stepped cylindrical hose adapter with a central stop flange and a continuous through-hole. - Total length: 3.25 inches. - Side A (larger end): Outer diameter 1.875 inches

STEPSTLGLB7 PARAMS
54.7 × 54.7 × 76.2 mmPrecision

Cylinder Adapter 36-42mm

Cylinder adapter, converting 36mm inner diameter to 42mm inner diameter with 1/4 inch thickness, 3 inches in length

STEPSTLGLB5 PARAMS
3D preview of 4WD Crop-Row Rover with Telescopic Spot-Spray Arm800.0 × 752.0 × 742.0 mmPrecision

4WD Crop-Row Rover with Telescopic Spot-Spray Arm

4-wheel drive for firm crop rows · Medium: 500–800 mm wide · Spot-spray arm with multiple nozzles and there will be 3 different tanks of 500ml each and the spray arm and the camera

STEPSTLGLB38 PARAMS
3D preview of Train Knuckle Coupler with Can Cradle210.0 × 80.0 × 97.5 mmPrecision

Train Knuckle Coupler with Can Cradle

Train knuckle coupler that can hold a soda/pop can

STEPSTLGLB23 PARAMS
136 × 42 × 10.5 mm3D Printing

Dolt Biltema-fäste för DeWalt DCB1104-QW

Alternativ B: låg adapter med 114 mm mellan laddarens upphängningsskruvar, infällda M4-muttrar och fyra försänkta tavelfästen.

STLGLB2 PARAMS
3D preview of Multi-Axis Low Loss Header Assembly558.4 × 446.2 × 1355.0 mmPrecision

Multi-Axis Low Loss Header Assembly

Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter

STEPSTLGLB19 PARAMS
3D preview of Fan/Air Duct Adapter129.0 × 45.8 × 45.0 mmPrecision

Fan/Air Duct Adapter

I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve, 5mm for transition between 2 20mm sections.

STEPSTLGLB7 PARAMS
3D preview of 3D Printed Steering Wheel280.1 × 280.0 × 18.1 mmPrecision

3D Printed Steering Wheel

A 3d printed steering wheel that fits onto a flange shaft coupling which is connected to the end of a smooth steel rod of 10mm diameter.

STEPSTLGLB11 PARAMS
3D preview of M3 Torx Flange Head Screw7.0 × 7.0 × 14.5 mmPrecision

M3 Torx Flange Head Screw

M3 Torx flange head screw

STEPSTLGLB10 PARAMS

Showing 24 of 292 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.