Fittings and adapters
Flange with Recess and Keyway
- Bounding box
- 60.0 × 160.0 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Part B: Flange with Recess Step 1 — Revolved body New Part → sketch on the Front Plane the half-profile through (0, 30), (0, 80), (40, 80), (40, 70), (20, 70), (20, 40), (60, 40), (60, 20), (5, 20), (5, 30), with a centre line along the X axis. Revolved Boss/Base 360°. The step at x = 0–5, r = 20–30 is the recess ⌀60 × 5 deep that receives the spigot of Part A. Step 2 — Bolt holes and keyway Bolt holes exactly as in Part A: ⌀11 at (0, 60) on the joint face, Extruded Cut Through All, Circular Pattern × 4. Keyway: sketch on the hub end face (x = 60) a 12 mm wide rectangle from y = 20 to y = 23.3 → Extruded Cut Through All.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 160 mm | 100 – 300 |
| Hub Diameter | 80 mm | 40 – 160 |
| Bore Diameter | 40 mm | 10 – 120 |
| Recess Diameter | 60 mm | 30 – 140 |
| Recess Depth | 5 mm | 1 – 20 |
| Flange Thickness / Relief Start | 20 mm | 10 – 50 |
| Outer Rim Length | 40 mm | 20 – 100 |
| Overall Hub Length | 60 mm | 30 – 150 |
| Relief Step Diameter | 140 mm | 80 – 280 |
| Bolt Circle Diameter | 120 mm | 60 – 240 |
| Bolt Hole Diameter | 11 mm | 3 – 25 |
| Bolt Hole Count | 4 | 1 – 12 |
| Keyway Width | 12 mm | 2 – 30 |
| Keyway Radial Depth | 3.3 mm | 0.5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Power Window Regulator Roller
Create a power window regulator roller with these dimensions: * Outside diameter: 24 mm * Overall width: 9.5 mm * Center hole diameter: 8 mm * Center hole radius: 4 mm * Groove di
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end