Fittings and adapters
4WD Crop-Row Rover with Telescopic Spot-Spray Arm
- Bounding box
- 800.0 × 752.0 × 742.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
4-wheel drive for firm crop rows · Medium: 500–800 mm wide · Spot-spray arm with multiple nozzles and there will be 3 different tanks of 500ml each and the spray arm and the camera will be adjustable for tall crops
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 700 mm | 400 – 1200 |
| Chassis Width | 460 mm | 300 – 800 |
| Chassis Height | 100 mm | 60 – 250 |
| Ground Clearance | 60 mm | 30 – 150 |
| Corner Fillet | 12 mm | 0 – 30 |
| Wheel Diameter | 100 mm | 60 – 200 |
| Wheel Width | 60 mm | 30 – 120 |
| Wheelbase | 450 mm | 250 – 900 |
| Wheel Track (Centre-to-Centre) | 560 mm | 400 – 800 |
| Axle Diameter | 16 mm | 8 – 30 |
| Hub Motor Diameter | 60 mm | 30 – 100 |
| Hub Motor Length | 40 mm | 15 – 80 |
| Camera Mast Diameter | 40 mm | 20 – 80 |
| Mast Fixed Height | 350 mm | 150 – 800 |
| Camera Height Adjustment (Tall Crops) | 150 mm | 0 – 600 |
| Camera Housing Width | 120 mm | 60 – 250 |
| Camera Housing Depth | 100 mm | 50 – 200 |
| Camera Housing Height | 90 mm | 40 – 200 |
| Lens Diameter | 50 mm | 20 – 100 |
| Lens Length | 60 mm | 20 – 150 |
| Number of Chemical Tanks | 3 pcs | 1 – 4 |
| Volume per Tank | 500 ml | 100 – 2000 |
| Tank Diameter | 80 mm | 40 – 160 |
| Tank Spacing (Pitch) | 110 mm | 50 – 250 |
| Pi Enclosure Width | 260 mm | 150 – 460 |
| Pi Enclosure Length | 180 mm | 100 – 400 |
| Pi Enclosure Height | 80 mm | 40 – 200 |
| Vent Slot Count | 5 pcs | 1 – 12 |
| Vent Slot Width | 12 mm | 4 – 40 |
| Vent Slot Length | 30 mm | 10 – 80 |
| Boom Post Diameter | 30 mm | 15 – 60 |
| Boom Post Fixed Height | 350 mm | 150 – 800 |
| Spray Arm Height Adjustment (Tall Crops) | 150 mm | 0 – 600 |
| Boom Bar Length | 800 mm | 400 – 1600 |
| Boom Bar Diameter | 24 mm | 12 – 50 |
| Spot Nozzle Count | 6 pcs | 1 – 12 |
| Nozzle Body Diameter | 10 mm | 4 – 25 |
| Nozzle Length | 70 mm | 20 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio