Fittings and adapters
Shaft with Keyway
- Bounding box
- 30.0 × 30.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tangent to the shaft) a rectangle 8 mm wide × 36 mm long, then Extruded Cut 4.0 mm deep measured from the cylindrical surface.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter | 30 mm | 10 – 100 |
| Shaft Length | 90 mm | 20 – 200 |
| Keyway Width | 8 mm | 2 – 20 |
| Keyway Length | 36 mm | 5 – 90 |
| Keyway Depth | 4 mm | 0.5 – 12 |
| Keyway Axial Offset | 27 mm | 0 – 54 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole