3D preview of G1/8 to V8 Adapter
Loading the interactive model…
Interactive 3D model of G1/8 to V8 Adapter

Fittings and adapters

G1/8 to V8 Adapter

1 views
Bounding box
13 × 11.3 × 8 mm
Engine
3D Printing B-rep
Parameters
1
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

An 8 mm long adapter with a male G 1/8" external thread and a female V8 internal thread (standard tire valve cap thread).

Parameters

NameValueRange
Overall length8 mm5 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of SM1 to RMS Thread Adapter26.3 × 26.3 × 7.6 mmPrecision

SM1 to RMS Thread Adapter

thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.

STEPSTLGLB5 PARAMS
3D preview of Under Door Split AC Exhaust Adapter304.8 × 180 × 85.7 mm3D Printing

Under Door Split AC Exhaust Adapter

I have a portable AC unit I want to use in my garage. i want to use an under the door style adapter. Source Image 1 (Front - under door rectangular): Height is 1.5 inch (convert

STLGLB12 PARAMS
3D preview of Inline Hose Adapter with Sensor Boss26 × 20 × 65 mm3D Printing

Inline Hose Adapter with Sensor Boss

Create a cylindrical inline hose adapter tube for automotive cooling. Total length is 65mm. The main central body is a cylinder with an outer diameter of 20mm and a length of 25mm.

STLGLB11 PARAMS
3D preview of Gutter Cleaning Wand8.9 × 70 × 42.5 mm3D Printing

Gutter Cleaning Wand

i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv

STLGLB13 PARAMS
3D preview of 1in Tool to 3/4in Hose Adapter30 × 30 × 49 mm3D Printing

1in Tool to 3/4in Hose Adapter

Create an adapter that can bridge a 1 inch ID tool to a .75 inch id flexible hose

STLGLB11 PARAMS
3D preview of Compact Harmonic Drive Reducer (Robot Joint)476.0 × 58.7 × 34.5 mmPrecision

Compact Harmonic Drive Reducer (Robot Joint)

请设计一个用于机器人机械臂关节的紧凑型谐波减速器(Harmonic Drive Reducer)三维 CAD 模型。 **一、整体尺寸与结构要求** - 减速器主体外径约 50mm,目标控制在 45–50mm 范围内。 - 总成最大轴向厚度不超过 50mm,包含安装法兰和支撑脚。 - 整体结构紧凑、对称,适合安装在机器人机械臂关节位置。 - 允许在主体外壳

STEPSTLGLB56 PARAMS
G1/8 to V8 Adapter - Free CAD Model (STEP, STL) | TextoCAD