Fittings and adapters
PETG Blast Gate (0.6 mm nozzle / 0.3 mm layers)
- Bounding box
- 177.8 × 118.0 × 39.6 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
optimize to be printed in petg with a .6mm nozzle and .3mm layer height
Parameters
| Name | Value | Range |
|---|---|---|
| Nozzle Diameter | 0.6 mm | 0.2 – 1.2 |
| Layer Height | 0.3 mm | 0.08 – 0.6 |
| Min Wall (extrusion lines) | 4 x | 2 – 10 |
| Blade Side Clearance | 0.3 mm | 0.1 – 1.5 |
| Corner Radius (body & blade) | 2.4 mm | 0 – 10 |
| Collar Root / Lip Fillet | 0.6 mm | 0 – 2 |
| Breakaway Tab Width (0 = none) | 2 mm | 0 – 8 |
| Duct Bore Diameter | 60 mm | 20 – 200 |
| Collar Length | 15 mm | 3 – 40 |
| Collar Wall Thickness | 2.4 mm | 0.6 – 8 |
| Body Width | 90 mm | 30 – 200 |
| Body Height | 90 mm | 40 – 250 |
| Plate Thickness | 3 mm | 0.6 – 12 |
| Blade Slot Gap (Z) | 3.6 mm | 0.9 – 12 |
| Side Rail Width | 4.8 mm | 0.6 – 25 |
| Bottom Rail Height | 12 mm | 2 – 80 |
| Duct Centre Height | 45 mm | 5 – 200 |
| Blade Thickness | 3 mm | 0.6 – 12 |
| Blade Bottom Height | 13 mm | 0 – 200 |
| Blade Length | 105 mm | 10 – 250 |
| Handle Hole Diameter | 14 mm | 2 – 40 |
| Handle Hole From Blade Top | 14 mm | 2 – 60 |
| Body / Blade Print Gap | 8 mm | 1 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio