Fittings and adapters
3D Printed Steering Wheel
- Bounding box
- 280.1 × 280.0 × 18.1 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
A 3d printed steering wheel that fits onto a flange shaft coupling which is connected to the end of a smooth steel rod of 10mm diameter.
Parameters
| Name | Value | Range |
|---|---|---|
| Wheel outer diameter | 280 mm | 180 – 400 |
| Rim radial width | 24 mm | 12 – 40 |
| Rim thickness | 18 mm | 8 – 30 |
| Hub outer diameter | 60 mm | 40 – 100 |
| Shaft / center bore diameter | 10 mm | 6 – 14 |
| Bolt circle diameter | 40 mm | 25 – 70 |
| Bolt hole diameter | 5.5 mm | 3 – 8 |
| Number of bolt holes | 4 count | 3 – 8 |
| Number of spokes | 3 count | 2 – 6 |
| Spoke width at mid radius | 25 mm | 12 – 40 |
| Outer rim fillet radius | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole