Fittings and adapters
Rev G Gauge Pod - Flange, Upright, Elbow, Display Barrel
- Bounding box
- 75.0 × 104.9 × 116.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • Hole centres: 61 apart in X, 46 apart in Y (±30.5, ±23.0) • Cable hole Ø20 through the middle 2 — Upright • 18 tall above the flange • Ø64 outside • Ø20 inside (cable only) • Wall 3.2 3 — Elbow • 40° toward the driver • Centreline radius R42 • Ø64 outside • Ø20 cable tunnel through the bend 4 — Display barrel • Straight length 60 (43 body + 7.2 bezel + connectors) • Ø64 outside • Bezel seat Ø57.6 × 7.2 deep • Body bore Ø52.1 • Back bulkhead with Ø13 cable hole Gauge (your calipers) Bezel Ø57.01 × 7.2 · Body Ø51.50 × 43.0 Envelope 75 × 105 × 116 (X × Y × Z) on the 91.12 × 65.33 island.
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Length (X) | 75 mm | 40 – 150 |
| Flange Depth (Y, driver-windscreen) | 64 mm | 40 – 150 |
| Flange Thickness | 4.5 mm | 2 – 12 |
| Flange Corner Radius | 3 mm | 0 – 10 |
| Corner Hole Dia (M4/#8) | 4.5 mm | 2 – 10 |
| Hole Centres in X (61) | 61 mm | 20 – 140 |
| Hole Centres in Y (46) | 46 mm | 20 – 140 |
| Cable Hole Dia (through middle) | 20 mm | 5 – 40 |
| Upright Height above Flange | 18 mm | 5 – 60 |
| Outside Dia (upright/elbow/barrel) | 64 mm | 30 – 120 |
| Elbow Angle (toward driver) | 40 deg | 0 – 90 |
| Elbow Centreline Radius | 42 mm | 20 – 120 |
| Barrel Straight Length | 60 mm | 20 – 150 |
| Bezel Seat Dia | 57.6 mm | 20 – 60 |
| Bezel Seat Depth | 7.2 mm | 1 – 30 |
| Body Bore Dia | 52.1 mm | 10 – 56 |
| Body Bore Depth | 43 mm | 5 – 120 |
| Bulkhead Cable Hole Dia | 13 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con