Fittings and adapters
Multi-Axis Low Loss Header Assembly
- Bounding box
- 558.4 × 446.2 × 1355.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1230 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark): * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP connection line. Bottom DN200 Blank flange requires a central 1" BSP connection line. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel Outer Diameter | 216.3 mm | 100 – 500 |
| Barrel Wall Thickness | 8.18 mm | 2 – 20 |
| Barrel Cut Length | 1230 mm | 500 – 3000 |
| Flange Outer Diameter | 340 mm | 200 – 600 |
| Flange Thickness | 24 mm | 10 – 50 |
| Top Boss Outer Diameter | 30 mm | 10 – 100 |
| Top Boss Height | 10 mm | 5 – 30 |
| Top Bore Diameter (1/2" BSP) | 15 mm | 5 – 40 |
| Bottom Boss Outer Diameter | 40 mm | 20 – 120 |
| Bottom Boss Height | 15 mm | 5 – 30 |
| Bottom Bore Diameter (1" BSP) | 25 mm | 10 – 60 |
| Nozzle Stub Length | 150 mm | 50 – 300 |
| Nozzle Wall Thickness | 8.18 mm | 2 – 20 |
| DN65 Nozzle Bore Dia | 73 mm | 30 – 150 |
| DN65 Flange OD | 185 mm | 100 – 300 |
| DN65 Flange Thickness | 18 mm | 10 – 40 |
| DN80 Nozzle Bore Dia | 89 mm | 40 – 180 |
| DN80 Flange OD | 200 mm | 120 – 350 |
| DN80 Flange Thickness | 24 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con